manfesto

Use an a100k (audio/log taper) pot instead of the b100k (linear taper) pot for the output volume Will give you the control you need (I...

At higher frequencies all 8 of them are directly in parallel with each other and with R1, so I picked a value high enough that it...

Worked great! I suppose this could have been done with a single resistor, but I dig the tepee thing. I hope @Robert implements this...

^can't really be done with a single resistor. That would be too easy 😉.

Physical size.

Looks like the cleanest way would be to hook the pulldown resistors to the 8 lugs of the switch, bend them all over into a "tent" and...

Assuming this is the pedal I think it is, I don't even see a demo on youtube? Does it actually exist? How do I even know if a pedal...

Every time I use genuine 2N1308s (or the CV7351) I find them fussy to bias and thinner/brighter sounding than the Russian MP38. The...

Took a look inside an acquaintance’s EQD Hoof Reaper that he swore “sounded better than every other Hoof he’s played” (he wanted me to...

I did a 125B-sized PCB that was a lightly-modded Boss OD-1 circuit into an OCD circuit and it sounded *awesome*; since...

For the rectifier diodes, you want something with a VF as close to 0.33v as possible. You can use BAT46 Schottky diodes as a sub which...

Nevermind I'm wrong. I read it incorrectly at least 4 times in a row. It's the LM3080N. Thanks for catching it. Time for new glasses.

Sure you’re not thinking of the CA3080? That’s a common chip in Ross-style compressors.

With the successful completion of the (Rockman) RMS X100 Rehouse Project V1 & V2, Josh Ledford and I are happy to finally release the...