phi1

Well, this is my last build report for the time being. I wanted to make a matching pedal with my amp build. I was also having some noise...

Doesn’t make much sense to me, but I’m curious what you find out with other diodes, etc

Some of you may recall a few months back I converted my "Goldie" Strat into an H-S-S configuration since the bridge position was already...

Based on the recommendation above, I pulled the 33n at C17 and installed a socket. Plugging a 82n into this location brought the low end...

As has already been noted by others, the FV-1 projects can only do 1 algorithm at a time, HOWEVER, it has only been alluded to or hinted...

Terrarium or Funbox. 6 pots and a bunch of switches and lots of examples of chorus, delay, and reverb.

If you’re going to be using them all together you could also consider a delay with modulation, which can get you into chorus territory...

Pythagorus and arachnid are the same, except arachnid allows up to 8 patches on a rotary switch. You can’t partially select patches...

The VHS uses one Fv-1 chip for reverb and chorus. You couldn’t really do all three in one fv-1, mainly because the fv-1 only allows 3...

NEVER too late for sharing info. Thank you @phi1 ! I might try making mine switchable.

That wire working with these boards looks fine to me!! I don’t remember the details super well. I read through my post and I said I...

Do they look similar to my pictures? I just used 22awg solid, same as I use for everything.

Waaaayy late, but recently I was looking at this so I’ll put it here in case you’re still wondering. The Caesar does for sure cut low...

I made a Runoffgroove supereux deux a while back and liked it a lot.

This got me thinking, can chatgpt produce code for a FV-1? So I asked it. Here is the response.