Bio77

I was wondering I could sub the 10k volume pot with a higher value, like a 50k or 100k? It's a voltage divider with ground but I'm not...

I just put some russian d9 x in mine. I measured and out 2 that were around .33 as i recall. Was just aiming for around .3-.35

There’s definitely a sound difference. But IMHO, the klon is a boost with a gain pot. That being said, I had one on my bass board the...

Here's my CAD2¢... I'd go with a Bat solution of some kind, as it's less affected by temperature than Ge. The Bat41 (a fave of...

I'm building up a bass Klon using Chuck's mods: https://forum.pedalpcb.com/threads/bass-klon.24042/ I have a stash of Ge diodes to...

Best way is to download the illustrator template from Tayda, it has the layers. You also need to install the Roland color swatch. Then...

Whoa, that's above and beyond. Thanks!

Was wondering if any particular Hfe for the 5088s was preferable in Q1-Q4? Any input appreciated 🤘

Very cool! What do the switches do?

Thanks for the post! I had a non-function Chop Shop on my bench for a few months and figured it was the MMBFJ201s which I didn't...

You could try 63/37 solder. It clumps less than 60/40 in my experience. Also, with electros, I usually place them with the full lead...

"Yep. The original had the SAD1024 in it. Lucas actually gave this one the old SAD1024 to MN3007 treatment like the electric mistress...

Super cool. If I remember correctly the BF-1 had a SAD1024 which is 2 512 stage delay chips. You have to adjust your frequencies...

If you are after the cool delay rhythms the Hydra Delay gets you there. Alternatively, you could post a WTB for the Sagan. Someone...

Mad Bean has a couple 1590B delays that are excellent. I'm partial to the Degenerator. There was also a 1590A 2399 delay, the Cave...