JamieJ

Are we getting one xD

So I finally revisited this pedal build after a couple of months of downtime, and found this post, well spotted on the resistor...

There's a bit of a story to this pedal: a few weeks ago, I was hanging out with the other band of our practice room, drinking beer and...

I couldn’t find any place that could uv print the front and back panels 19” is a bit to long for most machines I guess, and the front...

WIPs sometimes I feel lead to project purgatory and at the risk of cursing this one I’m doing it anyway… I was pretty excited that...

Sooo, went over everything, and at R48, [edit: (after the gate pot, on the VCC path going into pin2 of Q3)] there was a wee little 1/8...

As I often say, I don't have previous experience with any of the associated pedals or the 1176 itself. I'm also not a big user of...

ElectroVibe. the og swirly! grabbed the board about a year ago, took a while to get to it, but glad i did, it was well worth the wait...

I've been building pedals for several years now, and I realized I'd never actually built a fuzz face... of any sort. So I figured it was...

Hi guys, just wanted to share my fuzz face replica build. It's based around a 1969 fuzz face using a NKT271A NKT272 dated from 1969...

I've come back to this thread like a proud grandfather. Didn't expect it to still be rolling 2 and half years later! I love seeing the...

I have just ordered this one. Reeves Zo with relay switching integrated on the board.

I reflowed the FV-1 chip and the program selection circuit. I also swapped out D2 and D3 as when tested they were faulty. I'm unsure if...

So, I was never happy with the purple, especially how the pre-cat laquer cracked. I refinished it with faded sonic blue, cut a new...

The neck was also a bit too chunky for my tastes, so I took the opportunity to shave down the neck. It was stained with vinegar and...