jwyles90

Been a minute since I posted any builds.. I’ve put together a lot lately but haven’t been posting pics… Here’s a double Klone I put...

Awhile ago I presented a unique project to @steviejr92 it took a lot of planning on his part and time waiting on his new brake and cnc...

Yea that a good call. I'll try grounding just the input shielded wire and see if that fixes it, or maybe running the wire underneath the...

Just a thought. If buffering the input helps, it’s telling that the noise is definitely picking up noise on the input wires— buffering...

I'll give that a shot! I've also found that putting my Informant overdrive before it gets rid of the ticking entirely, so I'm planning...

AFAIk you should only ground the shield at one end and that's at the jacks, where it actually goes to ground

Ah yea, I swapped out both the oscillators for 022s already. It definitely helped lower the ticking noise but didn’t get rid of it...

If it’s touching the board it could be picking up the oscillator (the tl072 very top left looking at that pic). As someone else...

Since it’s 2 discrete phasers, both sets of input jacks would need shielding OR run a distance away from any board components. I see...

So this is how I've got it wired currently: I tried to ensure that all the wires that weren't shielded were running underneath the...

I attached a wire from the shield to the ground lug on the input jack, and then another one from the output wire to the ground part of...

Just out of curiosity, would the 8038's that are available through you directly need to have pin 6 lifted?

So I gave that a shot and somehow it made it worse? haha. When I turn my amp up or play a guitar with higher output pickups the ticking...

Some great options in this thread! A while back I built a Benson Preamp into a SS/BS Mini for someone. That was a super fun combo...