Ctrl4Smilerz's latest activity

I'm taking another look at this idea: 1) @Robert can you confirm if the Signal Buffer/Inverter has an input buffer? If not could I use...

Finished these two projects over the weekend. The Paragon Mini gave me a little bit of trouble, but was worth it because I improved my...

@z2amiller that did the trick! Thanks for taking the time to help me.

Good catch! They are both off according to the DMM. I'll work on switching them out and report back.

A few more details I subbed the MA856 with BASS33. I reflowed all my caps I checked for continuity (there was none). I measured the...

So this breaks my streak; my last few build worked without any debugging... The pedal works in bypass but I get no sound when either or...

Hi all, I would like to dip my toes in the Wet/Dry amp world. I was thinking of using 2x Signal Buffer / Inverter PCB's but have a few...

Thanks @MichaelW I'll have to give him a lesson. I recently got a Little Sister to go with my Fillmore 25 and have wanted to try doing a...

Absolutely would work for a wet dry. With the level control for each channel you can also dial in levels for the wet and dry rig then...

Nice clean build @giovanni Does any know if this would work well to split for a wet-dry rig?

I had previously tried to build the mini version a while back but failed, and was never able to debug the problem. I had always want to...

It sounds like the preamp & output portions of the circuit are working OK, so that leaves either the Gate, BBD, or modulation sections...