Recent content by DangerMuffin

Can I install the slide pots in this orientation? The slide pots I got don't fit if it flip the PCB.

Is this right? The slides don't fit in the right orientationif I flip the board.

I agree, but i already have the board and plate for the slide version, so...

I'm trying to build the 6-band EQ and I cannot find 15mm B50K slide pots with 30mm travel. Tayda, mouser, and digikey have all come up zeroes. Any recommendations on sourcing these?

I could only get it to fit next to the trim pot by putting it underneath.

No its just on the bottom on the board, since I didn't have 7x2.5mm ones i used some big fatties. Though if I have to pull out a transistor I'll swap them for some 7x2.5mm ones I just got. Do you think I can get away with a 2N4126 PNP? it's 25v max instead of 30v, and 250MHz instead of...

I adjusted the trim pot as best I could be ear, and I both the JFETs matched already from GuitarPCB. I have no idea where the attachment went for my multimeter to check them. Looks like the problem is that 2N4124 NPN BJT. Looking at the schematic closer it is clearly a PNP transistor. Gonna...

Just finished building the XC Phase and I've gotten it to phase on the 2 stage setting but I can't get it to phase on 4 stages. I also don't hear any difference between the Block and Script settings. Comparing it to a phase 9 in Amplitube the 2 stage Block sounds right, though I'm getting a...