Recent content by ehguitarguy92

Thank you! I built a second one to test for reference, and followed your suggestion of looking at those points^ I touched up solder points on all of these and power supply points (as well as two on the NE555 socket that tasted different on the first vs second one I built), and now we are off to...

I should caveat...my house has some power/noise issues from a local transformer in the power grid...so this could very well be directly related to that; I always have major problems with similar types of noise when recording at my house. I will take the pedal to my office tomorrow and test it...

LED's WERE reversed, thanks o_O now they are working. Reflowed all the daughter board solder points (and most of others for good measure). My 9V Onespot pedal power (1700ma) was still cycling, will have to try a different one. WORKS (Partially) using an alternate power supply (9V 1A) that is...

Pictures attached. Power supply is a 9v 1700mA Max, and I also tried a 10v 850mA supply. Voltage at C1 was ~135v with the 10v supply. Both power adapters seem to be working ok, and I have a 12v one I could try as well, but would need to flip the polarity of the jack. With the increase of the...

Hi there! thanks in advance for your help. New-ish user to building and troubleshooting PCB pedals specifically, but experienced with soldering and circuits/components in general. Recently built a Nobelium circuit, but am trying to troubleshoot why it is not working. I reflowed solder on all...