Recent content by gksdud2707

hello i have friedman be od deluxe. I want to modify it using the same channel change method as the empress heavy I used before. Is there a way to do this? Empress heavy can be turned on and off with each footswitch, and when moving from a heavy channel to a havier channel, the heavy...

Thanks to everyone who responded. I lost a bit of bass, but it doesn't whistle when I remove the cable. I changed R1 on AION DZ4 (R2 on VALHALLA) to 100k.

Once we have completed the enclosure we will remove the boards. When I touch the shafts of the gain and treble pots, I hear noise or whistles. Can I put them in an enclosure?

https://aionfx.com/app/files/docs/dz4_preamp_documentation.pdf Hello, I assembled my aion dz4 and tested it before putting it in the enclosure. (Because it is a test, the length of the in and out wires is long) Below are some problems I encountered 1. If the guitar is not connected, it makes...

What do r22 and c7 do? And what sound does it make when its value changes?

yes that's good thank you! Then, when I operate the toggle on my tyrian, there is a clipping sound at the high end of the high string, and the sound lacks clarity (especially when I lower the gain and treble). Is there a solution?

I just plugged in the 9v adapter and measured the voltage. Tyrian Ic1 and Ic3's Pin3 measure less than 3v Brwon Betty Ic1 Pin3 also measured as less than 4.5v. is this normal? If it's not normal, tell me how to fix it.

Hi, I'm not good at English, so please forgive me if my explanation is inaccurate. I completed tryian today. There is a problem that pin 3 of IC1 and IC3 does not output 4.5v, but it works. However, when the toggle switch is placed at blue and red (not severe), there is a high end like...