Recent content by Hokinator

A while ago, I tried to build a Double Pendulum Stereo Harmonic Tremolo, and am just now trying to diagnose some issues (no output at all in bypass, only one channel output when the effect is on). Given that one of my issues is the bypass signal, I assume I have a solder bridge or two under my...

I feel *really* dumb, because I clicked on the pdf but failed completely to notice the linked Tayda template. Sorry for my idiocy - use Robert's template, obvi.

Here is my Tayda drill template for the 1590BB Double Pendulum. I might recommend moving the I/O jack holes another millimeter toward the bottom of the enclosure, as my jacks are resting on the pots a bit, but it works. The board components all fit perfectly. This template assumes a two-prong...

This seems a bit... off. As far as I can tell, it's not quite symmetric, with the pot hole on the top right and the right LED both being noticeably farther from the center than their counterparts on the left (which, I think, are more accurately placed based on my measurements from the board). In...

No, it's not a PedalPCB product - it's made by Build Your Own Clone, and as far as I know is only available in a full kit.

It's a great pedal! A little finicky, particularly with the tap tempo, but it sounds lovely. It was a tough build for a relative novice, but worth the pain. Good luck!

Here's my drill template for the Echo Royal from BuildYourOwnClone. The Echo Royal comes with a pre-drilled enclosure, but I wanted to have Tayda UV-print an enclosure, so I had to prepare a drill template. This template assumes a DC jack with an external nut, and includes an extra 0.2mm on the...

Not realizing the build docs were not yet up, I spontaneously bought a Double Pendulum board because I love playing with stereo effects and have been wanting to build a stereo trem. I think I've figured out the basic BOM from the values printed on the PCB, but I have a couple of questions: for...

I created and used this template successfully to build an 8BitM8 kit I purchased from midierror on Tindie. It includes the extra 0.2mm on each hole to allow for powder coating, includes holes for both an arcade button and a footswitch, and because it allows room for an arcade button, it requires...

Great job on the enclosure! That's a pedal you can be proud of....

Here's another version that is a straight metric conversion of the Imperial template provided by Aion, with the holes expanded by an extra 0.2 mm for powder coating: https://drill.taydakits.com/box-designs/new?public_key=aTdEYnVCVlVyYVZVU05YSm9LTkQ4QT09Cg== I received the final product from...

This is a straight metric conversion of the Imperial template provided by Aion, with 0.2mm added to each hole diameter to allow for powder coating, and the LED hole sized for a bezel: https://drill.taydakits.com/box-designs/new?public_key=K0VKM1hLQjdzTnUyWkxyWTVUdXZpdz09Cg== I've received the...

This is a straight metric conversion of the Imperial template provided by Aion, with 0.2mm added to each hole diameter to allow for powder coating, and the LED hole sized for a bezel: https://drill.taydakits.com/box-designs/new?public_key=QjhmU1VrZGMyRjQxLzlobXdnd2M4QT09Cg== I've received the...