Jiberjew

You definitely got me on the right path!! I'll post everything once its done! Sure takes a great deal of patience. But, hopefully...

JLCPCB, SeeedStudio, and OSHPark are the most popular fabricators.

Most folks are using third party libraries (or designing their own) for use with pedals. See if you can find either the gaussmarkov...

Thanks again. I think I just figured it out. Just wanted to be sure I had the correct dimensions for a 1/4watt resistor, and looks...

Probably another dumb question, but my resistors are too big on the PCB. I cant seem to find the proper resistors to place on the PCB...

Perfect! This makes my design life a LOT easier! I appreciate the help!!

That dialog box is from the PCB editor, yes. The easiest way is to create a new component and pattern with those settings that you can...

Awesome!! This is in fact a huge help! I imagine this is configured in the PCB design, not the schematic design? I'm using "object...

It's a matter of preference, but these are my settings:

So, new to diptrace and PCB design. I guess this might be a dumb question, but what size pad do I use for input/output, ground, etc. I...

this build is dedicated to my late bun son Alvin 🖤 some may have seen his appearance earlier this year on a superfuzz build. after some...

This looks very interesting and simple! Maybe I'll give that a go. I think I have everything on hand for that. Thanks for all the...

I’d be interested to try this one before tacking on something at the end. You aren’t going to really get more of any frequencies without...

You will have a slight volume drop with that. I would put it between the out of the pcb and your switch so it is bypassed.