joelorigo

Yeah the strat was cool, thinking about doing another body in the future but not really committed to the idea right now. Rocket sockets...

I fixed the audio probe and got back at it. I verified that there was the hum at OUT and that there was still signal on IC 2 pin 5 & 6...

I just finally got around to it today. I had been frustrated and grumbling about it and avoiding it. It was a bad ground on both the...

Just to confirm again, I tired it after leaving it plugged in for a while, it worked, unplugged it and it didn't work (hum). Then I...

No, once I have the signal at IN and hum and OUT, I have always started going from the IN and following the schematic forward. I see...

When you check with the audio probe, have you tried starting at the output to see if you hear the hum then? If so, working backwards...

I sure can. Would you still suggest that if I said I have already reflowed every solder spot already?

try reflowing the solder connections for all of the capacitors on the PCB.

I plugged it in and hear the hum sound when activated. Then used a wooden chop stick to poke/prod/wiggle the 2 100u caps. Nothing...

If it works for you, then go for it! I’m not trying to interfere in anybody’s stuff or keep people from trying other pcb makers.

Yeah I like the values on the PCB a lot. I am bummed to hear about these issues, and maybe I won't buy anymore. However, for all reading...

I share your 2 cents

Yea, I know that feeling too. It is frustrating. Another reason we love PedalPCB!

No, that is a troubleshooting item I have never heard of or had to do yet. Like a chopstick/pencil? While it is plugged in an activated?

Would it be a good idea to replace those caps? Although now the LED thing isn't happening like I described above.