Recent content by Manuel Ammon

Thanks Michael, Clipping switch is, 1 Germanium, 2 Silicon, 3 LED. Tone toggle switch is 3 different modes of treble cut. All mods are in the Aion FX Aphelion kit see link below. Phantastic sounding pedal. https://aionfx.com/project/aphelion-vintage-distortion/

Yes, Avery transparent printed foil over mirrow foil. Works perfectly

Made a short picture story of one of my pedal graphics....

I am not a huge tech guy and happy with this kit. It's easy to build this pedal. Transistors are socket to change them quickly. 2N 3906 silicon and AC125 germanium transistors came with the kit. Most versitale fuzz I ever played.

Thanks Andre...

Latest built, Aion FX "Flare", 8 knob Fuzz Factory diy kit. It's a classic Fuzz Factory with 3 more pots, Tone, Soft and Body. Comes with 2 AC125 germanium and 2 2N3996 silicon transistors for more fun. Monster sounds.....

Sorry, found a treat in this group, see link below about a PAL800. It's the same circuit. Set all trimmers to 4,5V. Doesn't sound fine to my ears. I dialed in every 6 trim pots by ear. Started at 12.00 O Clock. After 30 minutes dialing in, pedal sounds like a real JCM 800 Marshall. Hope it...

Ordered my kit at Musikding Germany. All parts comes with kit. Look at the bill of materials. https://www.musikding.de/M800-Overdrive-kit

Because 11 is more than 10 and makes a lot of fun...

Thanks, Banzai Music Germany has Fresnel...

I just like the idea having potentiometers running up to 11.

Last pedal built. PedalPCB M800, Marshall JCM 800 type with full EQ section. It's a little bit tricky to dial in the 6 trim pots inside. Did it by ear. Full, raw sounding Marshall sounds. Wanted the look of a JCM 800 did the graphic like that. All pots runs up to 11.....

Missing caps are optional...

Missing caps are optional....