OD is Glorious's latest activity

for what it's worth, you can actually just sub the JFET for a 2N5089 (or probably a 2N5088) and it doesn't sound any different. (per...

Well, I got it up on the platform didn’t work. Checked all the resistors and caps redid all of the solder. No time for further testing...

Such an attractive pedal, I would buy this

Great sounding pedal. My 10 year old populated and soldered about 90% of this. Graphic is a drawing into Ai and then photoshop.

This is a report on my build of Dylan159's "Trembling Satellite," a version of the DIY classic Tremulous Lune. You can find the gerber...

If you run into that issue again you can mount them vertically using right angle pins (or rigid solid core wire).

Pretty cool!

This all started with @jessenator giving me the business for using an enclosure larger than his preferred 1590B. I threatened to put a...

I populated the PCB today. Got some help with one item: the 2sk209g orientation. FYI: I used an adaptor and did not consider the girth...

Thanks much!

Ignore the smd footprint on the PCB. It has no correlation when using an adapter. Just put the 3 legs in the 3 holes. Use right angle...

I’m currently working on an eight ball overdrive. It calls for this JFET when I look at the orientation in the directions and on the...

I have a Wampler Plexi on my board and it is glorious

Man, just perusing the build reports today and so many really talented folks on the forum doing their own PCB's and graphics. I feel...

All right, I made a little video. Somewhere toward the end, I engaged a Wampler Belle OD pedal. The pedal has a few nasally sounds and...