Recent content by ptone

I have an Electrovibe. With a 9v power supply, the effect is barely audible. The power supply tests at 9.38v. I tested the voltages coming out of the power section: +12.03v and +17.14v, instead of +15v and +18v per the schematic I briefly plugged it into a 12v power supply to rule out whether...

@Big Monk Thanks for posting these mods. Unity gain and max speed mod worked perfectly for me. I used 2.2m on R4, and 2.7k on R14/R15.

The subdomain was a good call!

I noticed that after the website update, a bookmarked URL for the electrovibe build doc is landing on a 404. You might want to consider adding 301 redirects for any old URLs that have changed. This would be helpful for users and for SEO! You can add redirects for each page in your .htaccess...

@joelorigo Thanks! So, it turned out the gain trimpot was a touch too low, which was making a bit of a difference. But, pedal order actually turned out to make a substantial difference. I had it with my other modulation effects and delays; after the gain stages. I put it before the gain pedals...

Hello! I'm wondering if anyone here can help me troubleshoot this issue, or if it's normal: When I engage the electrovibe circuit, it sounds great, but it's also acting as a high-pass filter, essentially. There's no low/low-mid content at all, and there's a slight drop in output volume, even...