Recent content by spacekid71

Hi Fama, I have not looked into it further for now, it is on my list of pedals to investigate. It would be good if PedalPCB would be able to help us with this issue as both of us are experiencing the same problem with the build. Maybe they already have some fix or workaround available that we...

Hi Everyone, I have built the Low Tide Modulator and it seems to work properly. I was just wondering if it is normal that the initial attack (starting to strum or play a note) gives me a popping sound (maybe its the gate?). Any help would be great! Thanks, Martijn

Thanks that was an easy fix!

I have built the Low Tide Modulator and the pedal is working but the LED is not turning on. I checked the schematic and it is getting VCC at the anode end of the LED. The Cathode end is going through two resistors to ground (R54=2K2 and R55=4K7) on the 3PDT switch. Also, I am using the 3PDT...

Hi Everyone, I am preparing for the Low Tide Modulator build and I saw that below Q1 for the 2SK208-Y there are some SMD pads. I dont have the pcb yet so would someone be able to confirm that the smd pads are for the Q1 transistor? Thanks, Martijn

ah okay thanks for that, much appreciated! is the lead spacing 5mm for the MLCC and Box Film capacitors? I had some previous pedalpcb boards that had 2.5mm lead spacing for some MLCC...

Hi everyone, I am thinking of building the Leprechaun when it comes back in stock. I dont have the PCB yet and I have some questions about the capacitors. What is the lead spacing, precision, tolerance and voltage for the MLCC, Film and Electrolytic capacitors? Maybe some people have built the...