spi's latest activity
-
An SD-1 is the way to go if you already have a Marshall. I would not build an SD-1 because they are so cheap. However, you mentioned... -
So now I have to admit that I frequently do that with outtie DC jacks to keep the protruding jack from looking quite so silly. The inner...
-
I too found that ever since I started taking a keen interest in sockets, ICs, and audio electronics in general, I also began attracting...
-
Bending the legs is not rocket science! Just place the IC on its side against a flat surface and gently push the plastic body to 90...
-
spi replied to the thread IC Sockets.Well you gotta replace the fakes
-
Yeah, just bend the legs square to the body and pop ‘em in. I’ve never had any problems 🤷♀️ I have however, when trying to pull a...
-
It's metric
-
I just put some langrex 6lr in there q1 305 180ma q2 235 .315ma and q3 471 594ma and it’s sounds like a pedal now. What a mess I made...
-
spi replied to the thread Very high soldering temperatures and components/boards.Me too To the OP, sounds like an issue with your iron--I can do lead solder at 600F. I use the tips that are like narrow screwdriver...
-
spi replied to the thread ZONKBOX not zonking.Like, no sound? or no fuzz?
-
spi reacted to Erik S's post in the thread Very high soldering temperatures and components/boards with
Like.
Hmmm. Never tried it, but I think I remember reading that filing was a no-no. Stupid AI results agree for whatever that’s worth.