Yes, this absolutely helps! I figured if they coexisted then they would travel through transistors and other components together before the transformed AC signal was passed on through C7 in this case. thank you all I appreciate it.
No, I am just not familiar enough with the flow of electricity inside of a circuit to come to my own conclusion on what is happening so I figured I needed to ask on here to see if anyone can explain it like I'm 5.
That would make sense. What I should have asked is if AC and DC can coexist on the same conductor since that is ostensibly what is happening, correct? If that is what is occurring in an effect circuit, then it might just be a complex waveform where the sine wave (or whatever wave) is similar to...
This is more of a question related to the fundamentals of electrical currents, but I haven't found a direct answer:
How does the DC Power interact with the AC signal (guitar pickups, other audio signals, etc) coming into an effect?
I understand the use of DC power as it relates to powering...
In a moment of pure embarrassment, I found the problem. My spatial awareness turns out I was turning the wrong pot this whole time and everything works. Case closed.
So I replaced the 100pf and 47uf caps unscathed, and still no luck. Tested all three trim pots, and all have approximately the same value. Kinda confused at this point because I am not sure what else to test at this point. I verified the 22uf cap and that is in good shape as well. Both resistors...
I recently finished a Mofeta build, and everything seems to be in good order with the exception that I am getting no sound from the "Normal" channel. The bright channel is working great, and I know that there isn't a bias issue, as I was able to get the gain and bright trim pots set up in a way...