Tassieviking's latest activity

Ooooooooo, I like the idea of turning the Bassdude into a JTM45!

So, in terms of simply bending the pin, that would work well. However, I needed to cut Pin 3 because I had already installed the module...

The Fc of 180Hz has been my favourite for Bass. It's a very low slope but still removes the mud.

So, after a pause to re-do my Bathtub Reverb MOD, I've now integrated the idea above [thanks Mick]. I have adjusted the circuit so...

I don't know if you would need the pentode in the circuit, the 200S had a 6AN8 pentode/triode combination tube after the tonestack but...

A Sunn 200s was probably my favorite sounding bass amp. that one shouldn't be too hard in pedal form either.

That looks like a nice and easy mod, I thought you would like the switching with the DPDT on-on-on switch since it just makes more...

It sounds like you got it working really good Samuel, is there any reason to have C2 so high ? I would have thought a cap to filter...

I would love to see a SUNN model T preamp, wait....maybe a Marshall Plexi 59, or a Marshall JCM45, or a Fender 5F8-A Twin Amp...

The insulation type and thickness is the only thing that matters for the voltage, for current (amps) it is the thickness of the copper...

I am also interested in this question, the Nobelium was designed to be a DI pedal first and foremost so the idea is that it should...

I think that reverb might get too muddy at very low frequencies (from what I have read), it will be interesting to see what you come up...

Lately there has been some people wishing that the Space Heater would become available again at Sushi Box FX, the Space Heater is...

I use 0.5mm2 wire which is close to 20 AWG for all wiring and that is plenty big enough, 22 AWG is also good to use. 24 AWG is fine for...

Oh, by the way, I'm in the middle of trying different values for my coupling capacitor. I'm still not happy with mine (the fc of the...