z2amiller's latest activity

If you wanted to really shrinkify, I think a dual seabed would be doable as a SMD layout in a 125B with dual footswitches (left feeds...

Z2Amiller, I don't know how to say thank you. Thank you for the time that you have invested in this and for making it possible for me...

Actually on second thought, this can be pretty 9V-friendly by changing the first stage gain. It drops the overall gain of the pedal by a...

I dunno if @Reconciledheart is still around, but I'm going through and cleaning up my old crappy schematics and repositories one by one...

Good to hear! Looking at the schematic, it looks like there's not a lot hooked up to the tone pot so not many places it can be. (C9...

In terms of soldering, it looks like you might want to reflow a few of the resistors. When viewed from the top of the board, you should...

IIRC from building this, the area of the trimpot where the chorus choruses is really narrow. It really helps to have a looper pedal or...

Great! Let me know how they work out. I don't have any wah pedal stuff of my own so don't have any good way to test. I'm happy to...

With my growing inventory of wah project parts, goona put those Gerbers to good use. Thanks!

And here's a version with plain PTH for the offboard connections. (0.042" holes to match the Vector wirewrap posts). The gerbers for...

Love the lockstitch pr0n. Back in my ops monkey days, I worked in a datacenter where some old-guard telco folks had wired it, and all...

Thanks for the exact measurements. I've updated the board to the latest. My initial measurements were pretty close (probably close...

I dropped the full KiCad project + Gerber .zip here (CERN-OSH-P licensed, no warrantee expressed or implied, etc)...

Sounds good. I think I'm within +/-0.5mm for the NPTH mounts but would appreciate fully accurate measurements to be sure, and let me...

Got a link to the inductor footprint I made for kicad right here. Only caveat is I haven't checked it against the RM-6 footprint of...