Bass contour only on neck pickup

[NickC]

ok, i have my fender with this wiring, i'd like to have only on the neck pickup a bass rolloff in the place of the standard tone pot

do you have any advice?

(in this wiring the bridge is unload, the first tone pot is for the middle pickup and the second pot is for the neck pickup)

thank you

 

[hamerfan]

Can be done. Connect your neck pu to the second tone pot and use a 1nF cap in series with the signal. Then route the neck pu signal back to the switch.

 

[Mir9]

I had this work best with C500k and C1M pots. On one of my guitars I applied the bass cut only to the neck also.

https://www.premierguitar.com/the-recording-guitarist-the-fabulous-focus-knob

For my pickguards, the pots I had for pedals worked fine. For my carved top, I had to order one from here: https://g-l-online-store.myshopify.com/search?q=potentiometer

 

[NickC]

thank you

something like this