Hard clippers are red LEDs, with R11 being reduced to 47r to hit them harder
C8 is 470n and R9 is 270k to fatten the soft clipping stage a bit
C18 is 22n and C19 is 1n to approximate the frequency with the parts I have on hand. Shifts the high band down a smidge
C16 is 33n and C17 is 10n for the same reason
EQ pots are 20kW with center detent because I wanted to use them in something
Volume is 100kA
The HMTone is stock except for a few parts I didn't have the called for values on hand - C3 is 82n, C4 is 8.2n, C5 is 2.2u. The net effect of these changes shifts the mid and low bands down a bit, but it retains most of its chainsaw character
