Deeptronics FOG

jcpst

Well-known member
Build Rating
2.00 star(s)
Is this the first FOG report from the group buy?

The EHX Micro POG is among the last of the commercially-built pedals on my board. So when I saw a DIY contender I was excited.

I like the knob layout of the POG, so I moved the center knob off-board and in-between the other two. I also scooched the PCB down a bit to avoid that side jack nonsense. Still, the build itself is simple, solder a few components and plug in a module. It fired right up no problem. When powered on, it takes about a full second before it's ready, and the default state is "on".

Now for a comparison

Micro POGDeeptronics FOG
Fast TrackingNoticeable slapback on the tracking
More timbre and upper harmonics intactLess timbre and upper harmonics intact
1590BB side jacks125B top jacks
voices can be set above unitymax setting for voices is unity

If my only factors are tone and play-ability, it's no contest. The POG puts the FOG to shame. It stands for Fast Octave Generator- but that must be marketing. It's not even close.

Where the FOG wins is board real estate and DIY street cred. I'm going to be fair and give the FOG a chance at band practice tomorrow.

If you want fast DIY tracking, Schult's Poly-Octave for the Terrarium is it. It sounds great and feels even faster than the POG. I turned my terrarium into a GuitarML Seed and gave it to my brother. But I think my next step will be to build another terrarium with limited controls and make it a dedicated Poly Octave pedal.


IMG_2849.jpeg
IMG_2850.jpeg
 
Last edited:
I’ve spent some time with this pedal, and I’ve dropped it to two stars. I use a variety of gainy pedals, and the FOG does not play nice with them. Any amount of dirt results in an audible digital whine. I am using isolated power.

That, combined with everything else I mentioned above makes for a pedal I probably won’t use much. The ehx POG keeps it’s place on the board.
 
I’ve spent some time with this pedal, and I’ve dropped it to two stars. I use a variety of gainy pedals, and the FOG does not play nice with them. Any amount of dirt results in an audible digital whine. I am using isolated power.

That, combined with everything else I mentioned above makes for a pedal I probably won’t use much. The ehx POG keeps it’s place on the board.
Bummer, though thank you for confirming this. I talked myself out of joining in on the group buy because I didn't believe that it could replace an ehx octaver but I've had nothing but fomo regrets ever since. I'll sleep better knowing it sucks with dirt.
 
Back
Top