DEMO You're so Fuzzing Special (Honey Special Fuzz / Moonn)

This post contains an audio or video demo
DGWVI

DGWVI

Well-known member
Build Rating
5.00 star(s)

I don't care for the modulation provided by this, but the full mids superfuzz variant it houses is rad, though it does lack some output volume stock

Mostly stock, mods being -
  • R9 reduced to 1k for better octave matching, and attached to an spdt to kill the octave
  • R17 increased to 270k for more fuzz output volume
  • Clippers are green LEDs
  • R28 & 29 are a 10kB pot with 1k limiting resistors to control the speed of the slower LFO
  • R26 is defeatable with an spdt to bring up the level of the faster LFO
  • R39 omitted to increase volume of the filter
  • R43 is 2.7k, and R46 is 1k to raise the overall volume. This also introduces a bit of clipping
  • Transistors are metal can 2222
1000038133.jpg
 
Last edited:
Whenever I see any of your mods, I always think "Oooo I'm stealing that!".

Coupla quick questions:

Looks like a 1590DD, is it not?​

R26 is "DEFEATABLE", and by this you mean replaced by a jumper... ah, never mind, I see R26 is populated and the DUAL Switch does the "jumpering".​

Cool stuff, as always.
 
Feral Feline said:
Whenever I see any of your mods, I always think "Oooo I'm stealing that!".

Coupla quick questions:

Looks like a 1590DD, is it not?​

R26 is "DEFEATABLE", and by this you mean replaced by a jumper... ah, never mind, I see R26 is populated and the DUAL Switch does the "jumpering".​

Cool stuff, as always.
Click to expand...

Correct on both counts

I only messed with the resistors in the LFOs, but swapping out the caps for other values might yield better results for the lower speeds. Any higher than 11k on the slow LFO and it lost all of its depth.
The faster LFO could probably be made adjustable with a 50kb dual
 
You must log in or register to reply here.
Back
Top