Keeley Psi Fuzz (PedalPCB Kinetic Fuzz)

[owlexifry]

Kinetic Fuzz - PedalPCB.com

Compare to Keeley Psi Fuzz

www.pedalpcb.com

- intentionally large layout for 1/2W size resistors and thicc caps
- unverified (build pending)

 

[JohnnyCreepy]

IMO Ionosphere sucked, is this more worth building? If it is, I’ll verify your layout within couple weeks.

 

[owlexifry]

IMO Ionosphere sucked, is this more worth building?

i haven't tried the ionosphere, but looking at the schematic, it only has x2 gain stages, so i'm not surprised this was your experience.

regardless, i'm pretty impressed with this psi fuzz thing.

If it is, I’ll verify your layout within couple weeks.

i still need to double check this layout against the schematic when im fresh and not burnt out.
(wouldn't recommend building it just yet, unless you wanna check it yourself)

but once ive done that, ill be ordering the 1/2W resistors and fatties to make a start.

i can at least confirm that the 34-hole-wide board does indeed fit in a 1590BB2.

 

[owlexifry]

IMO Ionosphere sucked, is this more worth building? If it is, I’ll verify your layout within couple weeks.

well, i went over it again and i couldn't find any errors, so i'd say it's good to go.

attached version with components removed/layout of trace cuts and jumpers. (no changes to the initial layout above)

 

[JohnnyCreepy]

I’ll try to get on with it in next few days!