Friedman Motor CIty (FET City Drive)

He made one connection from jack to powerpack to Jack and pulled it through a ground connection on the pcb and soldered at the ground in the middle on the pcb.
He pulled the positive through a ground connection as well to solder it at the positive.
 
i don't see a bass control on it.
think about what a non-MV marshall is.

they have x2 'channels' - and they can be blended together

- normal channel
- high treble channel

the normal channel has a lot more low end compared to the high treble channel. that's what he means.
 
I build the Golden Falk, and gave it away. With my Vox it was a bit bass heavy. I am expecting something different with this one. And maybe I might try the Subdecay Variac after this one
 
Last edited:
It's in the title, "Friedman Motor City Drive"... it was a real pedal, I own one, been discontinued for a while and not even on their website but you can find it if you search.
 
Exactly!!! This is an emulation of the original pedal... so what I'm looking for is the original schematic, that was obviously used to create this emulation!
Someone must have reversed engineered the pedal to see what was going on... I would just like to see that too.

Are you trying to tell me I can't ask for that?
 
My original post was clear!
I own the original Friedman Motor City Drive.
I'm looking for the schematic for that, not trying to build one from scratch!!!

No offense, but I'm not an amateur and don't need to be schooled.
 
Not sure what your agenda is but not one of your posts has been helpful.
I'll figure it out or maybe someone will be kind enough to share. :)
 
Back
Top