Search results

Hi I have build three of this pedals and I really love the distortion; but I don't use the middle position and the blue (top) position of the switch if I recall well, is there a way to use a different setting to get tightest sounds? ala triangulum boost aka fortin 33 (which I have but hate the...

I asked once, he said is in the works still

Nice, have a great weekend

Awesome I'll do that, if I remember well there is also a way to omit the side key chain?

I forgot to buy the range switch I am thinking about just soldering a jumper can't decide the setting, first time building this one. Any input is appreciated

do the voltage measuring, re-flow solder joints, audio probe and if it doesn't work then change IC's

has anyone compared a Boss digital delay any model against the FV-1 D3lay, what are your thoughts about it? have friend who wants a nice delay but I am still new to the FV-1 (that just got in stock), plus if I order one D3lay it takes like a month to arrive to my country.

thank you I ended p using some 1n4007 that I forgot I had

I don't have sockets, I'll run a simulation to see, thanks

is it OK to use 1n5817 instead of the 1n4001 in the charge pump?

Thanks I am still waiting for the PCB it takes forever to get to Mexico

Don't know how I missed this, Thank you so much Chuck, I'll build one soon with this mod

mostly any pedal can be powered with 12V and 18V, but the behavior can variate giving better sound, or bad noise, every pedal is different, for instance the sea horse uses pt2399 that is powered with a voltage reg (5V), and some op amps as long as the caps are rated more than 16v you can use...

play first then build!!!

I don't think that's the case here, as it's new. The only one who knows for sure is Mr. PEDALPCB Agreed. But I don't think that's the case here, as it's new. If you search, you won't find other Malachite build threads. I mean different pedal builds have most of the time the same issues

most of the time there are several versions of the same circuit, which improve with each new PCB, if I had to check this out, I'll use the REVV G4 schematic as a reference plus solder joints, all the outputs of each IC etc. the regular stuff, also reading other build problems and solutions helps...

yes sir

That's a great Idea thank you so much

I will order it from tayda, you can get 470nF + 100nF which gets you close, or even 470nF + 86nF = 556nF, one thing I didn't know is the cap can be MLCC which are smaller ans easy to fit. Hope this helps, greetings from Mexico

Great man!