Search results

Pick a circuit and the person who fits it onto the smallest PCB wins

I'll be up for this

That's crying out for a Tim Escobedo Ugly Face

Laney made a 30 watt supergroup semi-recently, the LA30BL. They deliberately used an underpowered output transformer to produce subharmonic 'ghost' tones, which is part of the sound I have one of these amps and can confirm that it weighs far less than a typical 30 watt tube head and that it...

Cool mate sounds good. I've been messing around in Diptrace with charge pumps and such this week. Will be putting in an order in with JLBPCB in a day or two. I'm new to PCB design and I've been quite ambitious so far lol. Will see how that goes

Yeah just the one quad but I've got a tube of duos. I'd be interested in that gerber mate

Yeah that's a good point. I'll do some digging Thanks for the suggestions everyone

Got one of these bad boys lying around and I don't know what to build with it - any recommendations? I tried it with a Belton Brick but the hiss was murder - I put that down to the extended frequency response

Edit: nvm it already exists, just found it on my travels https://forum.pedalpcb.com/threads/pedalpcb-electrovibe-lever-switch.22864/ Tayda will drill square holes now I've modified the drill pattern for the square Tayda rocker switch...

Just going through some build reports cos I started mine Love the privacy curtain lol

Thanks, I wet sand with 800 grit then sometimes dry sand then apply the decal bare Here's a Granger that I dry sanded, I think it makes it shinier

Cheers mate thank you

Finished these up. Pre-drilled enclosures from Tayda, then waterslide decals and clear coat Had a bit of trouble with the Swarm - ordered a CD40174BE instead of a CD4017BE. Don't do that lol. Assembly was very easy with header pins The name is a play on circle of fifths. The sounds this thing...

Cheers, I just need prompting sometimes lol

Oh I was using this crazy solder from Ukraine that has an insane amount of flux in it. I started cleaning it off with alcohol and it turned into a sticky mess so I gave up. Combine that with brutal lighting lol. That solder is back in the drawer now Coming back to the problem later it was...

I searched for your thread mate but I can't find it The switch itself functions properly and the pins are all connected to switch contacts, but the common pin circled red in the photo here doesn't seem to be connected to anything I tried bridging the common pins together and that changed the...

Yeah if I had a schematic I would test for continuity but I don't know what's going on

Cheers @comeradehoser I hadn't thought to remove the washer and try the other positions I'm getting no filter sweeps in any position on the rotary One thing I noticed is there is a popping sound when the rotary goes between positions 5 and 6, so something is connected somewhere

Proper IC arrived @Cybercow and that's fixed it :) Got a silly decal designed, will post a picture when I'm done

I was careful with those dual gangs but yeah definitely worth looking at. No change unfortunately. And I've lost my appetite I measured these ones, they're okay. You can get them in different tolerances