Search results

I'm guessing you have 100u tant in C2(100p)

+20dB Wow! Thqks for sharing

You have to buy the eeprom from the store. It's only $6. A blank 24LC33A is $2 so you're really only paying $4 for the programs. If you want the product, support the maker and buy the product.

I haven't populated my Informant but I really like the Eternity Burst(Lovetone Eternity) as a pre drive boost. It does the YATS as a boost thing really well. Cheap, easy build. There were dozens of versions to explore. I did up the input cap on the PPCB BOM to 82n IIRC because baritone. And if...

😂

Nah. The cold solder blobs are pretty blunt. I didn't measure mine. Just mental estimation off memory/not caring and picking a ridiculous capscity. One could easily deleter the jst or solder in a jst cable and wrap it around from the front of the PCB. Definitely easy and cheap to upgrade that...

Chongus bat-tree

Have you tried just flickin it a few times after some moderate friction?

While you guys have yours apart, not the jumpers on the left side of the PCB to increase the screen timeout. Just in case you didn't know...

C2C diplomat?

Use a Lucy muff(copper brillo pad). Hot take. Sponges are for losers who like replacing their tips.

Looking at the store photo, it looks like ring sleeve grounding is in play. Makes sense as it's designed for battery Try jumpering the two together or bodge in a wire

Reverse voltage transients in excess current rating of the diode It's really not a huge risk in a 9v pedal.

Just guessing as I can't see the RefDes on the board Im suppose the replaced the 0.1u electro blocking caps with films No audible change aside from lower noise.

I thought the firmware was a form of that open source FW modified to run on atmega. I forget the name of it. Dave's tester or something. Is there a better FW?

It's just for protection of the regulator Should be fine

The TC-1 and family are great tools for the price and very handy to have on the bench. For the Peak Atlas, buy once cry once and get the DCA75 unless you can scoop a 55 for cheap.

I believe that predates the TC-1 and is just running an earlier version of the same modified firmware

MN pots would also work good. But I think that's less control with the same outcome. You can't truly pan with this setup(moving a single signal across the axis) You just boost or attenuate one side. True panning would be double the circuitry. One could wire the dual concentric opposite each...

If the end result is headphones, you don't really need the second amp do you? Does the REVV have an internal load? Radial -> dynacord -> DimD --> headphones amp or interface Omit the one or the other rack pieces as desired. They both have mono in capability. Also. DimD in the send return of the...