Search results

  1. M

    What would you consider a "long enough" delay time for most practical purposes?

    I have seen this done with stock dual OpAmps in overdrive circuits. This is beyond my technical knowledge, what would happen if you stacked one PT2399 on top of the other?
  2. M

    Pauper

    Simple & Classy Look!
  3. M

    X

    It can give you that taking a blanket off type effect to your Sound. In House Graphics & sealed with Automotive Clear Coat:
  4. M

    E clip tool?

    I use a Spotter! When it goes flying, the Spotter is suppose to know where it lands! :D
  5. M

    SOLVED King Nothing No Effect Signal

    can see the issue now but you said this in your first thread '' I get 9.17 cathode pad of D2 '' which confused the issue. You will probably never get it wrong again from now on! Glad you persisted & got it working.
  6. M

    SOLVED Prismatic distortion not working

    You can edit your Post, in the Heading on the left side is the SOLVED option.
  7. M

    General Tso compressor issues

    Opa2134 voltage in Pin 8, Opa134 pin 7, never gonna work.
  8. M

    SOLVED Lowballer, is it normal

    Resistors all look Good! You need to try it with the Input & Output Leads down each side in the Enclosure to see if that improves it. It probably needs a C1K on the Attack to be more efficient??? You may have introduce noise with the pots being seperate from the PCB on fly wires???
  9. M

    SOLVED Lowballer, is it normal

    We would have to see a really good shot of the PCB with a good view of all the Resistor values. This is a classic example of repetitive similar values!!! or you can check the resistors yourself. Look closely at the 4th band {Multiplier) colours on your Board, ie 47r Gold. 4K7 Brown, 47K Red...
  10. M

    Is the Zorkmid overdrive what think it is?

    The Pedal has sold out again!
  11. M

    Is the Zorkmid overdrive what think it is?

    The Pedal is available again right now: https://www.humbuckermusic.com/collections/paul-cochrane-pedals/products/paul-cochrane-zefram-overdrive-pedal
  12. M

    Is the Zorkmid overdrive what think it is?

    The pedal when available is at Humbucker Music: https://www.humbuckermusic.com/collections/paul-cochrane-pedals/products/paul-cochrane-zefram-overdrive-pedal
  13. M

    Median Compressor PCB - Available Now!

    I will be trying Texas Inst. LM833N which shows almost identical slew & noise specs & JRC4580's! My enclosure is completed with Footswitch & Pots waiting for the PCB which has arrived but not on my side of Australia yet!
  14. M

    Low volume on Mofeta build.

    Can you show a picture of the Print/Writing on the 2N5457's in the Pedal?
  15. M

    M800 Overdrive

    On mine, if 7 O'clock is fully CCW it is between 9 to 10 O'clock.
  16. M

    M800 Overdrive

    Cool looking Build! The magic is where you set the Internal Tone Trimmer, it has a big impact on the projection of the Pedal!!! If it doesn't sound like a Marshall, something is wrong with the way it is adjusted overall!
  17. M

    D&M Drive

    just found TGP had this! Interesting ground connection!:
  18. M

    D&M Drive

    Not this one: https://forum.pedalpcb.com/threads/aphrodite-overdrive-custom-pedal.19657/
  19. M

    D&M Drive

    I maybe wrong but I 'm sure it was listed somewhere that the Buffer was removed. Only Robert can answer as to why it was never released, maybe not enough interest??? Dan is a switching guru & the pedal involved TRS switching so maybe that was a contributing factor. I have never seen a gut shot...
  20. M

    D&M Drive

    Well if it has a Buffer, you can switch the order so the OCD side comes after but you already new that!!!
Back
Top