Search results

  1. M

    Is the Zorkmid overdrive what think it is?

    Looks like an Original circuit!!!, does the YATS have 2 OpAmps & a Charge Pump???
  2. M

    PedalPCB Shrapnel overdrive, MBP Misfit, MBP Pastyface and AionFx Wyvern Silicon Overdrive

    Awesome Builds!
  3. M

    Is the Zorkmid overdrive what think it is?

    Cousin???, I don't think so!
  4. M

    Zorkmid Overdrive PCB - Arriving Soon!

    A really Great Overdrive I have been told!
  5. M

    Zorkmid Overdrive PCB - Arriving Soon!

    https://www.pedalpcb.com/product/pcb674/
  6. M

    Oxide Distortion

    Cool Build! What does the Yellow knob do? ;) This is coming in the mail to me, I have 2 that i built from Aion when they were normal looking PCB's way back with 9mm pots!
  7. M

    SOLVED Sprit Box No Reverb

    I have gone over this & can't find a fault, can you confirm that your electrolytics are the correct values, there are 2 100uf's that are different. The 1uf, 2 . 2uF & 10uf are the same size so check those. Can you confirm the 2 Transistors are correct? When you do a Continuity test, you can't...
  8. M

    Tone Generator Tester - Arriving Soon!

    9v Battery Powered1590A! This is an SMD project with tight clearances between components.: https://www.pedalpcb.com/product/pcb668/
  9. M

    SOLVED Sprit Box No Reverb

    Personally I use CRC CO Contact Cleaner, No brushing required: Just spray & watch it disappear & a 2nd squirt just in case any debris is still hangin' on:
  10. M

    SOLVED Sprit Box No Reverb

    It would pay to clean the back of the board, there is a lot of debris around that PT2399!
  11. M

    This Week on the Breadboard: Gator's OD - cb mod

    Something like this:
  12. M

    M800 biasing and no sound

    Now you have legit 201's, did you set them all to 4.5v to start with, then adjust them again as the they will go off voltage as you go through them! With good J201's that I got, they are all set at 4.5v!, you can then adjust them a whisker one way or the other and the Gain will increase or...
  13. M

    M800 biasing and no sound

    It's definitely got the JCM800 Gain available. Did you try turning the Tone trimmer as that has a massive effect on the Sound, mine is at 9.00 O'clock if 7.00 is fully C.C.W.
  14. M

    Help with 5F1 PCB identification, please

    If you like Aion, they do version 1 & version 2 of the Formula 5, your PCB is definately a Clone of the Formula 5! https://aionfx.com/project/asteria-preamp-drive-mk-i/ https://aionfx.com/project/asteria-preamp-drive-mk-ii/
  15. M

    SOLVED Kliché OD eats batteries like crazy

    This Stereo version is what you need, Battery Negative wire to short prong on the Input Jack.
  16. M

    Granger Boost PCB - Available Now!

    There are heaps of Members who view them & there are the greatful ones that appreciate the work & give me a thumbs up. Must be a challenge to push the like button??? If it says Mockup, it is Photoshop. This was the Shrapnel that I built & it has been photoshopped with a new colour, different...
  17. M

    Help with 5F1 PCB identification, please

    https://www.pcbway.com/project/shareproject/Catalinbread_Formula_No_5.html
  18. M

    Help with 5F1 PCB identification, please

    After some research it is very similar to the Catalinbread Formula 5!!!
  19. M

    Help with 5F1 PCB identification, please

    It's suppose to be a MUU Cow I believe!???
  20. M

    Help with 5F1 PCB identification, please

    Heres a Demo, The volume pot wants changing:
Back
Top