Search results

Oh boy... tables are no joke. Now it's complete.

Hi guys, I made a pcb for a phaser based on Whetstone/Redshift/Kezuroukai24 and of course it is not working. https://aionfx.com/app/files/docs/redshift_documentation.pdf https://madbeanpedals.com/projects/_folders/FilterMod/pdf/Kezuroukai24.pdf My schematic is attached. It's the Aion Redshift...

I did that once and immediately ordered at jlcpcb :-) Even if I needed them only for one other project I have no an easy to use pcb for another project in 5 years or so.

Yes that's it, thanks. 33k does not make it the most variable presence but it is audible and usefull. I will likely not desolder and replace the pot as it is a pain...

Here for the presence it‘s 33K. Will try https://warpedmusician.wordpress.com/2015/11/16/dual-rectifier-presence-controls/

Not me

Done! But I need to troubleshoot in the next days. No mid, bass and presence control. My one spot 9V/1700mA is getting really warm! I accidentally soldered the treble pot not completely straight so I had to solder like a maniac to fix it. There is some screatching in higher gain settings after a...

Awesome! Reminds me of a Warhammer pedal I always wanted to build... You could have called it Hammered Overdwarf and it would be a 11/11 :LOL:

I have a bag of these little things But I don‘t know the exact english term. Literally translated these are soldering nails. Perfect for various clips but as they are soldered they are most probably only usefull for cable connections where this things stays in place and the cable gets soldered...

Yes, diy is the way. You should also make the fp smaller to not always get errors in the drc when using the standard 2.54mm grid

Color labels are vinyl sticker sheets for my laser printer. Transparent labels are transparent sticker sheets. Even though both say "waterproof" etc I always put a transparent sticker sheet on top. Still have to tinker with the color saturation. Sometimes it's to pale sometimes to dark...

Thank you guys! I used a few of his schematics to build pedal. Always nice but this one is different. The most current version is it, he didn't have issues with it. It depends on if you are able to get your hands on it :-)

Hi guys, I play my bass in the living room with a EBS Preamp/Headphone Microbass and I wanted something similar for the Guitar. Just using what I have is not DIY :-) It's a box with a - Baja Reactor - Omnicab - Stereo Headphone amp with Aux-In and an additional mono out to drive a cab in case...

Thanks!

Thank you for the explanation. So where would then be a perfect place to hook up these two grounds? Near the jack I suppose? I'm asking because I want to make my own smaller pcb for this large project.

Hi guys, can anyone explain why the Aion Redshift needs the pwr_gnd around the IC3A in the LFO section (if that's it) ? https://aionfx.com/app/files/docs/redshift_documentation.pdf Madbean uses one gnd for everything on his version Kezuroukai the...

Did the shipping change for the US? I use to order with option „Europaket“ DDP which was around 3€ for up to BB size pcbs but it was raised to over 5€ for my last small pcbs. So the pcb was 1,85€ and the shipping almost x3…. (VAT excluded)

Which transistors did he check? JFET for example have interchangable drain and source. If you want something really good for transistors get a Peak DCA75. It's expensive but "worth" it. Edit: a nice comparison

I don't know if it's him but he want's to sell them in the future. Resin casted clear shaft.

My purple metallic is much darker…. And the metallic colors in general are so easy to scratch. My next orders will be non metallic.