Search results

Presets settings also in full analog way!

At the moment it was the most complicated project to do, both for the graphics of the PCB (used to those of pedalPCB) and for the whole calibration thing, in fact I had to use an oscilloscope to make the task easier. In the end I'm more than satisfied, I manage to get what I wanted, the guitar...

I'm about to build this pedal, can a DSO138 be used as an oscilloscope?

I just saw this project :love:, I would like to know if it is based on the original circuit or on the made by mike version

at the moment i don't have it, i need the measure/specs for the Boss close framed jacks, the hole too if possible. thank you folks!

with 2 different spray cans, first give the base black (in my case it's a pearly black with glitter) and then blend the metallic gray and then black again on the sides, it's simpler than it seems. In the photo it doesn't reflect what it is in real life which is definitely more beautiful.

I had the first original version but the enclosure was too big and I was looking for a more compact version, the sound is identical, the external switches are very nice , excellent project. A special thanks to @DGWVI for the transistors problems.

done with some old 2n5458 and now it sounds amazing! thanks!

solved i have changed the banzai music 2n5457 with some old 2n5458 in my stok, it works!

just the same problem! i'll try to change the 2N5457

I just finished my octrarock everything works perfectly except the low octave, strangely I tried to remove and replace the second jrc and for a few seconds and then faded I heard the lower octave as it should sound, so if you got these components like me on banzai music the problem could be...

this pedal reminds me to nine inch nails tone from broken/the downward spiral era, nice (y)

the commercial delay is the carbon copy?

yeah i like my xotic comp at 18v

yes me too , too fuxxxxx loud! you need to replace the volume with log A100k pot

I would like to find a solution like a transparent "open and close window" to access the capacitors, with experience I like to change them according to the guitar, fender style gibson style.

great, as soon as you do it show us, the only tricky part is to adjust the momentary button under the heel, you have to cut a small piece of it and remove the small rubber under the wah heel, to make it return exactly to the "closed" standby position

just the color! 😆 it's a spray painting i made, the color is pearl emerald green, i love this line products. https://www.saratoga.it/it/prodotto/1/49-vernici-spray/234-happy-color-perlato/ i usually use a white primer than the main color and a glossy or matte finish. believe me these colors...

i can confirm LEDs don't light up, mode 1 is led clipping very dinamic the most balanced, mode 2 no clipping, is a clean boost lots of volume and little or no distortion, mode 3 diode clipping, less volume, more compression and more distortion, the three modes are very distinct from each other.