Search results

i have build the Master Phaser and the Octavius , both works great. the octavius it is always present on my pedal board, it sound amazing.

ok , i also used this circuit to match the transistors, i can confirm that the ones sold by banzai are not matched to 4 but in pairs of 2, instead i ordered a set from retroamplis and they are perfectly matched, in fact now the phaser sounds wonderful, with the banzai set sounded decent but now...

some time ago I bought a set of 2n5952 already matched (banzai music), but being curious I tried to build a circuit to test them, I used this http://www.geofex.com/article_folders/fetmatch/fetmatch.htm now I would like to know, I have to place the multimeter on the gate and on the 3 pin of the...

i had the made by mike, i sold it because it only had one decent setting, otherwise it was weak. As for the pumpkins i think their gear information is full of half truths, i don't think the mxr dist 2 was used on all solos but only on a couple at most, like the use of mutron biphase.

@Robert can you upload the documentation file to the octarock pcb page so that musikding can do the kit? thank you

unicab is a great project, always on on my desk test

thank you something like this

ok, i have my fender with this wiring, i'd like to have only on the neck pickup a bass rolloff in the place of the standard tone pot do you have any advice? (in this wiring the bridge is unload, the first tone pot is for the middle pickup and the second pot is for the neck pickup) thank you

+1 with invert phase switch option o_O

+1 for Octarock Octave

check this

it's not for recording. To understand, after the preamp, amp, distortion, etc., I go to the OX BOX and then enter the audio interface, then a dry send comes out(I turn the signal line into instrument with palmer daccapo) and goes to the tempo and modulation effects, which return again to the...

and if I wanted to turn it into stereo? It would be convenient for me to experiment with wet/dry things

the internal overall gain trimmer you have on the brown betty , i use a 100k linear pot in the place of the R6 in this case.

I needed a thermionic with the mid pot and ,why not ,with the internal gain trimmer transformed into an external pot, all in a compact format, so I simply used the littel debbie pcb with the thermionic specifications and I added 3 pots. it was a bit trickie to build but you know.... it sounds...

i promised myself to stop building od/dist pedal. Ok i will sell my archer klon to build this heheh

i read that they never used a big muff for live gigs, they try it in the early days but it didn't works.

It's the lehle switcher

a clone of Mu-Tron Octave Divider?, nice