Search results

  1. C

    Woodpecker Build Issues (New Version)

    But shipping costs from Mouser add up to around $12.00. And I just ordered all my parts for my (2) new builds. So I do not want to pay $12 just for one part, and I am not sure if the problem is the 2n6027.
  2. C

    Woodpecker Build Issues (New Version)

    I just tried all (10) of the China 2n6027, and none worked. I see one on Amazon and Mouser, but 10 to 12 dollars. Do you happen to have one that you know works you would be willing to sell?
  3. C

    Woodpecker Build Issues (New Version)

    I just built mine, and same issue. Volume pot works, and acts like a clean boost, but no changes with either of the depth or rate pots. I do have PF5102 which seems to work fine acting as the boost. Also used 2n5089 which I either got from Mouser or Tayda. And using 2n6027, which I got off of...
  4. C

    Arachnid Builds (Older Version)

    Will you be selling these boards? I would need one set
  5. C

    Double Arachnid mega pedal

    I used whatever I had lying around, I think it was a linear
  6. C

    Double Arachnid mega pedal

    I used a 10K pot.
  7. C

    Double Arachnid mega pedal

    Here is schematic for the clock board. So the three holes are for power, ground, and output
  8. C

    Double Arachnid mega pedal

  9. C

    Double Arachnid mega pedal

    The trim pot is the only control. I used a regular pot so I can adjust it. The other wires are for connections to the circuit. I do not remember right now what they are
  10. C

    Double Arachnid mega pedal

    I like the internal programs, and it easy to set up. Just a SPST switch to ground from a resistor I do not have the schematic with me right now. The clock, I first saw on the EQD Afternearth pedal. Pedal PCB does make a PCB for it. It just gives you another control option.
  11. C

    Double Arachnid mega pedal

    That is really nice. On my build I added a switch so I can either use the EEPROM or FV1 chip programs. I also added the clock board so I can adjust the clock speed and put a switch in so I can either use the clock if the board or the internal crystal
  12. C

    I added the mid control to my Thermionic Distortion to make it a Little Debbie

    3PDT
  13. C

    FV 1 volume

    Old one
  14. C

    FV 1 volume

    I built the Arachnid and with the volume maxed it barely gets to unity level. Would I need to raise or lower the 100k volume pot to get more volume? Thanks Rob
  15. C

    250k dual log pot

    Like this one? https://www.taydaelectronics.com/potentiometer-variable-resistors/rotary-potentiometer/linear/b-250k-ohm-linear-dual-taper-potentiometer-pc-mount-round-shaft.html
  16. C

    New Tyrian Distortion pedal compare to?

    Sure, the Sanguine came out first and was the G4. I asked if he was going to make the G3, and the Tyrian came out.
  17. C

    New Tyrian Distortion pedal compare to?

    I believe this is the clone of the Revv G3, and the Sanguine is a clone of the Revv G4
  18. C

    Tuesday.

    And ordered. Do you have the bill of material for these new pedals?
  19. C

    Tuesday.

    Yessss!!!!!!!!!!!!!!!!!!
  20. C

    Tuesday.

    Damn it, I just sent in my order, and I bet the other (2) I am waiting for are what you will be adding to "in Stock".
Back
Top