Search results

That's right. However, there won't be continuity if there is a component in the way, resistors, capacitors, etc, are "stopping" the continuity. In this example, in green there is continuity, in red there isn't. R1 pin2 is connected to R2 pin2, so the digital multimeter (DMM) should ring. Same...

The glowing enclosure is a great idea for a Lab Rat ! You aroused my curiosity, but unfortunately they aren't available at musikding.

Audioprobe : https://diy-fever.com/misc/audio-probe/ Soldering Iron temperature : I'd say somewhere between 370 and 400 °C ? I use 0.56mm soldering wire, and 380/390 °C is all right. You might have to do some tests, to find the right setting. If it's hard to put the solder on the pad...

I built the SDT-2 because i like some SDT-1 variant very much, so i wanted to try it. It's a great distortion able to get heavy on the low frequencies, just as i like them. It's quite different from the GCI Bass Brutalist which is based on the SDT-1. The gain texture feels a bit more precise...

I decided to build the Black Eye upon recommandation from @jhaneyzz. All my thanks for this kind suggestion ! The fact that some Sushi Box effects are available at musikding, allowed me to build this project. This circuit sounds amazing, it's impressive and very inspiring, it will be put to...

After a few years building stompboxes, i felt confident about these big builds, and i was very curious about these Lovetone circuits. I built the Spectron before (Meatball) and it is such a great circuit that i thought that everything coming from Lovetone must be amazing. I have to admit that...

I suggested to build your own clone, so i guess i have to give you the warning. Same warning those who taught me how to build stompboxes gave to me, a few years ago (and i laughed but they were right) : If you are going to build stompboxes, there is a chance that your interest in music shifts...

The Dark side is always the easiest path... Is there a way to keep it as default setting, when we log out ?

Link to Black Tiger Boost schems : https://docs.pedalpcb.com/project/BlackTiger.pdf I didn't check the whole thread, but i see there are some doubts about the power supply readings. Is this the one ? In this case, there is no way it reads 23V, and you won't find any switch, this power...

If someone would give this effect to me to fix the issue , without any schematics, i would first reflow all suspicious pads : i think the soldering is quite "average", to say the least. Then i would clean the pcb soldering side with isopropyl alcohol, or some solder residue cleaning spray. I...

Hello, welcome ! A picture of the circuit inside the enclosure could help understand the issue and spot suspicious things. First thing that comes to mind is trying to use isolated wires for IN and Out jacks, and use some tape to stick them along the enclosure's sides, in order to put as much...

Hello, welcome ! Yes, i built it too and i need to set Treble fully CW to have some noticeable High frequencies. There is also a position on the toggleswitch that is darker than the other. But when Treble is set fully CW, Bass and Mids at 12' and the toggle is set on the brighter position...

Mods on octavers are quite unusual. You could change the status led color, but i doubt this will be enough to satisfy your need for mods. It's not like a distortion or an overdrive, there aren't any obvious things that many diyers have done before. It would help if you could be more precise ...

Unfortunately i won't be able to explain how it works, i will follow this interesting thread and learn as much as i can. I also built an Oxide distortion, all i can say is that the EQ is among the most effective EQ i ever tried. I am surprised that you are not fully satisfied with it. If i...

Impressive build, great artwork ! I am a big fan of this channel. This time i don't fully understand mister Haney's choice of color for the status led. Are we sure that blue/cyan is really perfectly suited for this effect ? Aren't yellow and purple more appropriate colors for flangers ? Isn't...

The first thing that comes to mind is calibration. If the BBD trimmer isn't set correctly it won't do any modulation. Try to turn it slowly when the circuit is activated, with a guitar signal going in the circuit. The modulation may appear at some narrow spot in the trimmer's rotation. If i...

Surely you're aware that there is an easy mod to bypass the fuzz section and access the plexi circuit on its own ? https://forum.pedalpcb.com/threads/bypassing-fuzz-part-in-corduroy-fuzz.2951/#post-23696 I'd say it's a good mod, can be useful, and give a larger range of sounds to this circuit...

Also some simple and effective tools, with many different uses ? For exemple, to cover a hole a bit too big, or to protect a plastic ring from the 3pdt screw. You will probably be very safe and confortable with these. It can be found sometimes on a rotary switch or some big toggleswitch, but...

Using a cable from a broken EHX power supply, and some tape to make it stick along the enclosure's sides, worked. The whistlings are much quieter and the weak spot in the gain rotation disappeared. Thank you very much ! I didn't know the original circuit, my build sounds so bad that i am...

I thought, according to drill template p.17, that when i turn the rotary switch fully CCW it's the Square wave, and fully CW it's Sine ? It's hard to tell just by listening though... It's the position almost fully CCW, next to what i think is square. I used the same layout as in the drill...