Search results

They do work, but I can see where I could have connected strictly through the footswitch/bottom. I kind of like having the ground/9V on an isolated connector, as I can pull that through the mounting hole cleanly (I avoid soldering components in the case, because I am bad at it). I suppose I...

OOOHhh. Thank you. Well spotted! This is definitely backwards.

Just about a month ago, @MichaelW was kind enough to send me one of his extra SheepyLove GS808, laid out by @szukalski. When I got back from vacation, I looked over the board and put it an order for the components that I didn't have on hand (a 51pF capacitor and W-taper potentiometer - never...

That looks great, and also a great result. I have this PCB in my stack to build but want to get a handful of other pedals (simpler) under my belt before diving into this one. I am looking forward to using this, as flangers fit my synth setup.

This week's Phido Sound new build is the Ohl Junction, based upon the Marshall Guv'nor, using the PedalPCB Guvernator PCB. I finished this a week ago, but was imagining that I might put together a demo for the sound. Given that my guitar playing is not that exciting, and this pedal isn't...

I finished wiring up the aurora deluxe and I definitely have some troubleshooting to complete. I have sound and bypass, but only on one side of the blend. So my really basic starting question is - which direction (CCW or CW) is the clean vs the compressor for this circuit. In my case 10 (full...

That's a cool idea, If there is a worthy difference I could make a similar mod to the circuit. I have a straight build of the pedal with the 2N5087, so I can already do A/B comparison once I have #2 worked up.

This is a busy circuit to breadboard, I will probably socket the transistors, and then see how this sounds with alternative transistors. I also want to see what LM13600 does to noise in this circuit as well. I need to get in parts before I build this new version (part of the question's...

I'd love to see this working (and wish I could help, but I am not that skilled at debugging circuits). Phasers (and modulation, in general) fit nicesly in my synth effects chain!

I didn't know these exist, but have done basically the same thing with hypodermic needles, which are basically the same things without the handle, and a pointy end you can accidentally jab yourself with.

I am building a second copy of the AionFX Sunstone (EHX Small Stone), and I wanted to know if I will see significant difference in replacing the 2N5087/2N5088s in this circuit with a BC549C/BC559Cs. I know the BC's have to be rotated 180 degrees, but will I notice any appreciable increase in...

Pulling this over from: https://forum.pedalpcb.com/threads/what%E2%80%99s-on-your-workbench.13146/post-355537 What sources do you have for the Fujistu Relays used in the relay switch boards like in the link. I see these at Mouser at $4.43. As much as I like the idea, it seems like I'm cheaper...

That;s really nice and clean. I need to keep working on my soldering skills to get this good.

I am now! What I mean is that the only "innie" style small diameter jacks I have seen have metal housings that ground to the case. It's an aesthetic thing problem I have, as I try to align my top mounts jacks and the "outie" audio jacks like this are too wide to play nicely with the common...

Awesome design and build again! I prefer outies, too, but would love to find a smaller/narrower version that doesn't ground to the case.

That's one of the durps.

I need to perfect my selection of wire lengths and routing, for sure. Wait 'til the next one.

I am pretty sure that the audo in and out grounds aren't connected to the board anywhere in the pics.

Rolling out the new builds, my next Phido Sound build is the Argand Plane, based on the EHX Small Stone, using the AionFX Sunstone PCB. This is my first build on an AionFX pcb. The PCB layout is nice and the build directions are easy to follow (I am sure I am not the first to say that). I...

Update: Here is a link to a Mouser cart for all the parts for the Micro XLR Output board. Update 2: I have confirmed that all of these parts fit the PCB, Micro XLR Output and an updated list of the SMD dimensions.