Search results

Hey everyone. Since there doesn't seem to be a PCB available for the DOD FX22 (Vibro Thang) I thought I'd try my hand at putting one together myself. I found a pdf for the schematic here, but I have also attached a screen shot. My question is: If I were to make a true bypass clone of this...

Thanks for sharing this. Just watched a video. I am quietly obsessed with this now. It sounds great.

Yeah wow, does it do anything? May as well just scratch some bare wire.

Wow that really is a fuzz face circuit, sandwiched in between (what I assume is) two buffer circuits. What makes this schematic work when generally FFs apparently sound bad after buffers? Does the second buffer somehow negate this?

Hey everyone. I wanted to know what everyone's thoughts were with fuzz face type circuits and buffers before them. Is it a good idea to add one and what will it do? I had the idea when reading the thread about the Pestle Distortion/EQD Zoar which I understand to be a FF but with a JFET buffer...

Got it going. It was bad tracking pot. Replaced it with a new one and it works well.

Thanks for the replies everyone. I'll put one of these together once my amp is fixed. My family will be so happy. Tayda accidentally sent me a 1590A enclosure and I havent figured out what to do with it. This might just be the project for it.

Thanks for this. Does this act need power? Is this only for the led or am I missing something? I had assumed no power wound be needed here.

Hey everyone. My amp is way too loud and the family are complaining. I'm looking for an option to reduce the volume in my Fender Blues Deluxe Reissue. I know it has an effects loop. JHS has the little black box that claims I can chuck it here in the effects loop and I can reduce the volume but...

Hey. I have a blues deluxe reissue and would like to tame the volume whille still having it sounds great. What did you make for this? Do you have a schematic I can refer to? Or is it just a potentiometer in the effects loop?

Thanks. I’ll give this a go.

Looking at the schematic, if I changed the value of R3, lowering it , that should allow me to get more movement from the tracking pot right?

Hey everyone. I have put together this modified version of the Mif-fi Clari(not) but I seem to be having issues with the tracking on the LFO/LED. Everything seems to work as it should, however the LED only lights up when the 1k tracking pot is fully counter clockwise. The LED will not light up...

Hey. I'm looking into this option but don't know enough about SMD parts to know what to look for. What relay do you use? Do they have a A-4.5W-K relay? Not sure how to find it. Also do you know if they have any simple film capacitors that are basic parts? Looking for 100nf which I assume they...

Hey! I actually went with a V9 NYC. I breadboarded a big muff when I was starting out and really liked it. I got the schematic from Beavis and from my research that schematic seemed to be the closest to the v9. From this thread I also made a peach fuzz which is very nice. I also put together a...

I tried it this week and yes it does work. I think the lamp sounds better but it is still nice with the led. Has a more pronounced throb (at least with a red led). Might be worth experimenting with different colour leds. Perhaps a clear will produce a similar sound to a bulb.

Let me know how you go with this. I agree the tone and fuzz don’t do a whole lot. At least it sounds good.

This is a good idea. I might do this myself.

For posterity I'd like to say that the 5528 LDR work completely fine in the electrovibe. I made a version for my friend with 5528s and a random lamp from Mouser (8097 12v .06A) and it sounds great. I initially tried it out with a red LED and that sounded pretty good too. I am yet to do a side...

Will this do the job? https://www.digikey.com.au/en/products/detail/panasonic-electric-works/TQ2SA-4-5V-Z/649355