Search results

I didn't write here, but this is a thing that Tremster should consider, indeed. I advice to increase a bit of bass at a time, until the effect is right for him.

Increase the input and output cap is a good trick, but these seems to me bigger enough. You can try to replace the 68nF with a 220nF, and the 1uF to 10uF, and see if you get more bass. Maybe you should try to increase even some coupling caps, like C4 (150nF) and C9 (220nF), trying bigger caps...

I meant, maybe we can use a 9v PSU and use a regulator voltage, like a 7805 to get 5v and supply the amp circuit. While we can supply the input buffer directly with the 9v getting more headroom and less distortion?

Cool! Is this sounds clean is very cool. Do you think we can use an internal board with a 7805 regulator voltage and supply it with a 9v psu?

Thank you! I contacted them and I'm waiting their answers.

I built the Muzzle with a kit by Musikding. What can I do now? Should I contact Musikding?

Hello, I built a few years ago the Muzzle for a friend. I was really impressed by it! After I built it I test it with my friend: I used its TU-2 to split the signal, used the Input key and put the pedal in the loop effect. The 4 cable method. I tried the distortion channel of the amp but even...

Ok, thanks. I read that technically are slightly different, maybe to adapt to the new chip the circuits should be slightly modified. This is what I get. But maybe, and I hope, the difference are imperceptible. https://www.profusionplc.com/images/data-sheets/4301-4305%20transition-guide.pdf

Hello, I ordered the Muzzle in kit from Musikding. I built it some years ago, but this time I got the three SMD chip 4305 adapter PCB. That's new for me. I have to start to populate the PCB, but I'm reading some issue with this adapter, and now I'm little bit worried. I'm not sure if I...

Maybe I can help you at least with the Graphite Distortion, I make a research just yesterday. You know that is the Mad Professor Grey Stone Distortion, right? Search the original version schematic, and to make the modern version you just add in parallel those three parts. - The 47nF cap in...

Very nice pedals and very nice pedalboard! How those illuminated knobs work?

I heard, sometime, about the squeal/whistle/oscillation problem in the Tyrian or more than else with a diy replica of the Revv G3 pedal using different board, like veroboard. Maybe protoboard not. I never built it, but I think that a signal track longer than G4 (Sanguine version), the mid boost...

That was referred right to the PAL800. Someone of us are trying to get the schematic of this new version.

In another thread, I guess, someone revealed to me that those transistors are double: in one package there are two transistors, so six pins. This is what I get.

I always thought that the two pedals schematically are pretty much similar. The difference is in the impedance. (TS 808 is true bypass). Maybe, this caused the interaction with the amp that could make sound "better" the TS808. What do you think?

I built it on veroboard. I never understand why the Decay pot don't do anything. (I made the mods by Sabrotone, but I think I used TagBoard layout).

My soldering station is a cheap one, I think I have no much tips to choice, and I guess there's no way to find those strange tips. I should to buy a better one, but honestly, I don't want to spend it now. This one work since years, and the only problem has been to replace the tip with another...

Musikding doesn't sell a sharp tip of the MLS-48 soldering station. I don't know why. I had to buy a new one, but it's round, indeed. Not so good to solder smd transistors. (if you know where I can find a replacement sharper tip of the MLS-48...) I'm thinking about a new cheap iron solder to...

My memories was wrong! I thought the MicroAmp Plus had Gain, Tone and Volume. Anyway, buy an used pedal, look inside and re-sell it, is not a bad idea. Maybe we should looking for someone who have it to take some gutshot pictures, at least.

Though the Micro Amp is very famous and well known simple circuit, I never got any information about the Plus version with tone and output volume. There are some imitation of it with the tone pot (the master volume could be just a pot in the end of the circuit), but nothing about the original pedal.