Search results

Haven’t posted in a while but have been busy. This one is from Aion and sounds really nice. Overall making progress to where I want to get to. Respect the hell out of all you and your super clean builds.

I have one of these I am going to build and had a few different ideas somewhat similar to what you have, but this maybe changes things! Awesome job!

Very nice!

Alrighty then, appreciate the confirmation. As I was typing that last post I kind of had a light bulb go off and realized I was being thick headed. Dang, I had no idea about the LDRs. Guess I'm not done with this one yet. Appreciate the assist!

So I turned the intensity down and still get a good signal at all three of those pins. Something occurred to me and I feel pretty dumb asking this whether I am right or wrong: Should the Level serve more as a mix or a volume/boost for the already mixed signal? If I turn the level all the way...

No I am waiting on my PT2399s to arrive from SB.

So swapping R12 with an actual 56k didn't seem to do much. In fact now I seem to be getting some crackling coming through on the wet signal when I play with any sort of volume. R11 and R14 are indeed 100k. I can hear a signal on pins 1-2-3 / 5-6-7 on the TL072.

Found my reel of "56k" 1/8w resistors. That's definitely what I put on the board. I'm not the best at reading the color lines but it certainly didn't add up when I tried. So I tested and they are all 12k. Someone in the sweatshop needs a beating for mislabeling these things I've wasted like...

I’m getting no dry signal in my mix. This is the same issue I ran into on my last build (ironically or maybe not) so I’ve checked the TL072 and socket and whatnot. Getting dry signal at R14 and pin 5 of the TL072. Get wet signal all the way through. Anyone have ideas?

Reminiscent of an Indian Rx website... something don't smell right.

Yeah I've seen others say the same about SB. Sucks because I need some 125Bs.

I was putting guitar level signal as well. Don’t really get the clipping when I am playing softer. Actually played the thing for an hour last night and enjoyed it, but was limited in what I could play. and yes my pt2399 was from Tayda too. Ordered some from SB last night.

absolvism - Curious, did you ever figure this out? Just got done troubleshooting my Dark Rift and have a similar issue.

I thank you both for your help! Mcknib, you were correct. I finally had some time to pull it out of the box. I lifted up the rate pot to get a better look at the solder joints on the socket for IC2. Sure enough... pin 5 was COMPLETELY UN-SOLDERED. It felt great to put that thing back in the...

On the TL072 I can hear dry signal on the pins 1-3, and then wet on 6 and 7. No signal on pin 5. ... and with the mix all the way down I get nothing at pin 6 or 7

R18 - Dry signal only

One of a kind and if it sounds good that’s really all that matters!

Nice how does it sound? I have a Kliche clean ready just need to box it up

Nice!

Indeed it is