Search results

I just built this one yesterday ..... to see if it was something I might have messed up building the other 5 Here's some pics of the back of the board plus my voltages on the IC's went over the back and inspected all the joints ..... everything looks fine ..... something weird going on with...

All the negative sides of the Electro's are facing towards the footswitch ..... and I've swapped out the 4u7 you highlighted on 2 or 3 of the builds .... did not fix the problem ...

yes they are ...

OK .... just got done measuring the spots you told me to check out .... Kliche Mini Pedal Off : R28 = 0.2 Ohms R29 = 6.1K Pedal On : R28 = 4.9 M R29 = 0.2 Ohms my working Kliche OD Pedal Off : R28 = 0.3 Ohms R29 = 32K Pedal On : R28 = 5 M...

Thanks !!! I thought it might have been footswitch related .... so I built one with the included break out board and one without .... same issue .. funny thing ... I've been researching the hell out of Buffers ... and trying to learn about impedance ... I don't have a Impedance meter ( yet )...

I guess I do

I realize this ..... but when I turn the gain or the treble or the volume it still has an effect on the bypassed signal ... this doesn't happen on my Kliche OD .... the signal doesn't budge .....

yes it is .....

OK ..... so further went through the circuit with my scope ..... and found that the " treble , volume and gain still effect the signal when the pedal is off ... any ideas what could be causing that ? cause that has to be why my bypassed signal sounds like crap ... no ?? my Kliche OD does not do...

OK ..... so further went through the circuit with my scope ..... and found that the " treble , volume and gain still effect the signal when the pedal is off ... any ideas what could be causing that ? cause that has to be why my bypassed signal sounds like crap ... no ?? my Kliche OD does not do...

I swapped the chips from my working Kliche OD into the Kliche mini ..... still have the weird voltage on the mini .... and the Kliche OD with none I can't sound check any difference at the moment but I'm assuming getting the voltage on the signal is causing the problem . none of the codes...

OK .... I don't think that's it ...... not for me anyway ..... I just swapped all the chips ... from my working perfectly Kliche OD into my Kliche mini build ... and vice versa .. I'm getting a tiny amount of DC voltage on the outputs of both .... no AC voltage at all on the Kliche OD ..... and...

I won't buy IC's from Tayda ...... bought a batch of 100 from Mouser .... doesn't mean I couldn't get a bad batch from Mouser I suppose ... Thanks for the input by the way ...... you are the first to mention having the same problem ..... I did not try to switch out the op amps .... just the...

Regarding the Kliche mini ... Anyone have an idea why I would have voltage on my output jack ........ I'm getting 0.513 V AC / 0.5 mV DC on my out put jack ... and throughout the buffered bypass circuit . If I pull the TC1044SCPA out ..... the Voltage goes away ..... it seems to be only on the...

Regarding the Kliche mini ... Anyone have an idea why I would have voltage on my output jack ........ I'm getting 0.513 V AC / 0.5 mV DC on my out put jack ... and throughout the buffered bypass circuit . If I pull the TC1044SCPA out ..... the Voltage goes away ..... it seems to be only on...

already changed the cap out ..... still happening .... I'm getting 0.1 Mv at the junction

the signal starts showing those little blades right at the negative side of C3

no ... I do not .... I saw someone mentioned trying one of those is some research I did . I'm going to order one to see if it will work I traced down exactly where those little saw blades start showing in my bypassed signal ..... right on the negative lead of C3

OK I've included a few pics of my scope .... the first pic is from my Kliche OD ... running a sine wave into it ....scope placed directly on the output jack .. pedal is off / bypassed . the other two pics are the Kliche mini set up on the scope the same way . the pedal is off / bypassed ...

tracing the signal now ..... no luck as of yet .... I'm not audio tracing .... I'm using a scope ....attached a pic