Search results

  1. J

    Tayda packing and shipping

    Wait. Are you saying you don’t read those every time? And just check them anyway?
  2. J

    Tayda packing and shipping

    I ordered today, and I checked a box acknowledging that powercoat+drilling is 16 days out, and to expect up to 4-5 weeks for UV prints. And that August is particularly busy, they anticipate September will be faster turnarounds.
  3. J

    Parasit Raygun Youth (stripboard)

    This is my first stripboard build. W00t! I tried a perfboard build a while back, but found it tedious and frustrating. To me, this was way easier. One thing that almost bit me was the way I prepared the wiring. I measured and placed the wires as if I was going to insert them from the bottom...
  4. J

    SLO

    I have a thermionic that squeals at high settings. Putting a buffer in front of it was my workaround.
  5. J

    SLO

    The Black Eye is in my next batch of builds. I’m looking forward to it, there’s been so many positive things said about it in the forum. I remember hearing it in a build report from @jjjimi84 and it catching my ear immediately Thread 'My most asked question, it's not what you think!'...
  6. J

    Moonn Sir Wobblington

    If you want the noise, I highly recommend dropping “a hint of carnage” in the basket. It’s most excellent. Thread 'Moonn - A Hint Of Carnage' https://forum.pedalpcb.com/threads/moonn-a-hint-of-carnage.26706/
  7. J

    Tayda packing and shipping

    My most recent order took quite a bit longer than in the past (around 10 days). I ordered some powder coated enclosures.
  8. J

    Sanguine aka Revv G4

    This is my 2nd time building this one. I had the first one for about a week before a buddy really wanted it. Finally used these red knobs. Kept the graphics simple, it’s a bit harder to draw on the sand texture finish. I love this thing, and I’m glad to have one again. I prefer it over the G3...
  9. J

    AI art tip: Microsoft Designer

    C’mon. Is using a sampled piano on a keyboard really art? 🤡
  10. J

    AI art tip: Microsoft Designer

    I'm not jumping in to judge the use of AI here, or your workflow. Just thinking of AI tips... I'm not in the graphic design world, I don't know the latest tooling available. I bet most people around here are a better resource for that than I am. One thing I've noticed- the whole "vibe"...
  11. J

    CDXL aka DOD 440 reissue

    The final build from the weekend. Another upside down pedal. This is one I didn’t plan. I had the board and everything I needed laying around. I salvaged a footswitch and audio/dc jacks. I like the simplicity here. It’s easy to get a good sound. I probably would have been ok hardwiring the...
  12. J

    hey, everybody, I'm a stupid moron with an ugly face and a big butt, and my butt smells, and I like to kiss my own butt

    https://ceriatone.com/series/model/hot-rodded-plexi/ https://evolvediy.com/?post_type=product https://www.aaelectronicspcb.com/
  13. J

    Analog Envelope Filter?

    I haven’t built it yet, but I bought a PCB of the VFE Old School from Mad Bean Pedals because it has that feature.
  14. J

    Nutty Fuzz aka Acorn Audio ADHD Fuzz aka Ugly Face

    I finally procured an expression pedal. That was enough reason to scrounge up the parts for this one. It doesn’t qualify for the PHB contest though. The depth of my expression input was off at first. Swiss file to the rescue. Fortunately, the plastic washer for that jack covers the hack job...
  15. J

    Nein

    Thanks for the comparison with the Desolate. I’ve been wanting to read someone’s take comparing the two.
  16. J

    Arche Boost x2 (clean and dirty)

    I wasn’t sure how to box these up. I considered squeezing them into a 1590BB, 1590Q, 1590XX… But then I thought I could get the most flexibility by making them a pair of 1590Bs. I found several reports of this having excessive treble. I should have taken the warnings seriously. There is some...
  17. J

    Sheepylove Sarda aka Dylan159 Clown Centurion

    Yep- thanks to the excellent open-source designs by @szukalski https://github.com/szukalski/pedal-dylan159/tree/main
  18. J

    Sheepylove Sarda aka Dylan159 Clown Centurion

    This came with some goodies from @drgonzo1969 ❤️ For those not familiar, dylan159 has a number of designs that are a sort-of antidote to the mojo, with a dash of minimalism. In other words, what can we simplify, remove, or replace with common parts. This is a take on the Klon. I gave away my...
  19. J

    Aleph Null Clever Hans

    Mhm, I’m digging how aggressive the FILTER is. Fwiw, the one I used measured around 510pF or so.
  20. J

    Aleph Null Clever Hans

    Yes, I was pleasantly surprised. I ordered the new (to me) hammered finished Tayda had in 125B. The Silver Gray and Blue hammered finishes look cool too, but the white hammer felt right for this one.
Back
Top