Search results

OK so holy sh*t. I was deep, deep googling, desperate to find a schematic. Using image search, all sorts of key words, whatever I could think of. Some of the image hits started showing the PCB that I am now familiar with after staring at it for hours. So, I came across a random post from...

that is/was an excellent suggestion and recommendation but sadly that is not it. the output is about 90 to 95% too low. when i am probing and touch those 2 caps the output is proper. when not probing and jsut using the output jack (etierh L or R and wehther input L or R) the volume is just so...

Yes I have looked over every milimeter of the board, both sides looking for any thing obvious like cracks or any such. When i touch the top of C134 and C135 caps I get a glorious and very wet and loud and proper 700ms at 50% wet mix and it sounds NORMAL. so, up to those caps things seem OK...

Yes they are very close to the outputs. I marked them here in orange, the caps and the IC's I get full wet sound out of. I guess I will keep probing and doing as you suggest but this is for sure needle in haystack! Some parts of probing stop me dead in my tracks, others I keep getting audio...

LOL! Trust me, it is NOT the guitar pot. It is EXTREMELY LOW OUTPUT from the delay pedal. The only reason I was getting any sound at all with the drum machine is because the drum machine was CRANKED. I am realizing now the OUTPUT level from the OUTPUT jack is about 95% less than it should...

So what do you make of THIS. Instead of strumming a guitar as my audio source (and wanting both hands free) I plugged in my old as hell Zoom drum machine and had a bass line going. This worked great to test and get output. I did not pay attention to what the output level was on the machine...

OK so here is some interesting stuff. I have the PROBE clipped to ground and i have the probe female 1/4" output sending singal to my crappy amp. I have a DRUM MACHINE plugged into input LEFT and when I touch my PROB to the output jack it sounds NORMAL. when i touch my probe to the output of...

My probe was built with an Ibanez barrel jack, an alligator clip, a 100n BF cap and a random wire/clip lead I had. The probe lead is not set to go as 1/4" output to an amp. This is very interesting. What I did was take a 1/4" to 1/4" stubby jack (like the ones to connect pedals). I have that...

I have built my probe using a 100n box film cap. I have the alligator clip on ground of circuit and my probe lead is hovering. i have the INPUT of my probe coming from a guitar (for now) and then I have the output of the delay going to a crappy amp. I strum gutiar and start placing probe onto...

I measured 7805CT With DMM set to DC I get this: PIN 3 5V PIN 2 nada PIN 3 10.8V With my DMM set to "auto sense" I get this: PIN 3 0 PIN 2 0 PIN 1 9 MEGA OHMS I will have to build an audio probe. A nice member on the forum sent me a pdf guide on how to make one with 100nF (.1uF) Capacitor...

I think the tap tempo footswitch button is just a secondary issue... the main issue is the zero output of sound. well, actually it makes sound IF i max out all of the knobs and make it do an endless delay feedback on itself but its super faint, quite as a mouse and barely audible. googled the...

The first thing I did was google for schematic but they do not appear to exist. TC seems to have never published them or just never made them available to public. I have the unit open and there are 2 PCB's. One has the tap tempo/on off and LED readout, the second is the main PCB. I looked...

I picked up a known non-working TC ND-1 Nova Delay. It powers on but there is no sound. Do we discuss t-shooting non PedalPCB stuff here? Looking for some tips/pointers as to where to begin the t-shooting process to see if I can make this pedal work, else I will have to sell it for very cheap.

LOL! Very funny. I was not actually thinking in terms of absolute when using the percentages, more of each one being an out of 100% scenario, haha.

Spencer is GREAT, extremely helpful. I am jacked on time right now but need to finalize the lazer engraved plate for my Cataclysm delay and have him build that one up for me. I am still such a noob at INKSCAPE that I'm learning the ropes on the correct layer presentation so when I send for UV...

Anyone build this yet?

Op - Did you get your pedal working?

Got my cs12. Digging it. Also ordered a 2 tier NUX bumblebee medium size

I shot him an email. I really dig the idea of the plastic overlay. I think if done right and attached at each of the 4 corners with a cool looking screw it would look super bad ass. Thanks man.

So, buy 20 sheets for $17.80 https://sunnyscopa.com/collections/waterslide-decal-paper/products/filmfree-waterslide-decal-paper?variant=36075517640870 Buy 200ml of W1+ Glue for $15.00 https://sunnyscopa.com/products/glue-w1-w2?variant=36075710054566 Shipping is $14.00. So All in for $37.90...