Search results

That pedal looks great awesome job!! I haven't started putting mine together yet. Still deciding if I should make one more attempt to get the enclosure right. I believe I've managed to figure out mostly everything I was doing wrong 😜

So I just noticed that part of my issues with the graphics and holes are due to the pedal advertised on the steel panther site is not the same as the actual pedal that was sold knob size and graphic placement are much different. Dammm you Satchel!! lol 😋 🤦🏻

I made some bad mistakes in the placement of the holes in my custom drilled enclosure. I put them to close to the edges and the potentiometers didn’t fit inside. I did manage to get a good idea of where they should go now that i have the finished product tho.

Looks great!! I have had very bad luck trying to get the graphic to match the enclosure and kind of gave up for now. I did get all of my parts and my pcb. I just goto get the courage to start soldering it together once i can figure out which parts go into which spots :p

Added a sticker of my design onto the back of one of my enclosures with a few knobs just to get an idea of what it could look like 🙂🎸

Printed some vinyl stickers and my alternate version of the design (for pre drilled enclosers) is pretty close just a bit off on the text under the top knobs but other then that its half decent :p

Big thanks for the info folks I was a little worried that maybe customs opened it and saw the word face melter and possibly got the wrong idea lol

Hi does anyone know if theres an issue with having the pcb’s shipped into Canada? My order seems to be in limbo somewhere in Miami since the 16th and hasnt been trackable on Canada post site yet. Im just wondering if its possibly a customs issue or maby its just super slow for some reason...

My UV printed enclosures arrived today 🥳 I already knew i messed up because of the positioning of the holes but it was more about the quality of the print and if I set up my Pdf files properly. I think it turned out really good, I like the gloss version better then the non gloss version tho. Now...

So I had a bit of time on my hands last night and also had some of my parts arrive (not enough to build the pedal yet lol) and decided to finish my idea I had for the Kill/Revive switch that has a switch to switch between kill and revive lol (I said switch a lot didn't I :p) and after a bit...

I got bored and decided to make the actual "Face Melter" graphics (since that's what the board is called) for anyone who would like more of a PG13 version of the pedal. I added the original layout and the layout for the predrilled enclosures from Tayda, Enjoy :)...

Thanks for the quick answers!! 🥰

I got some of my parts today but now I have a few questions :p first how do you folks fit eveything inside these enclosures its looks like its going to be very tight in the end. And second is the little part on the potentiometers that stop it from fitting in flush (picture below) how do you get...

Hope everyones having a good morning 🙂 I modified the graphics to work with the pre drilled enclosures that i got Hoping the vinyl stickers Im having printed look good once they arrive. Then the clear coat should be fun if I can manage to figure out the right kind to use and do it right lol

Yes i had ordered the pre drilled enclosures but mistakes are bound to happen hehe I have now setup a decent custom drilled template on taydas site. Im just not 100% sure about the best way to do the holes in the front for the power and jack cables. This is what I got setup so far.

Well I just ran into my first big mess up, my graphic doesn't match up with the pre drilled holes on the enclosure. The 2 that i had UV printed are gonna look pretty bad. sadly I should have looked closer into those details before getting them printed. Ill have to order another with custom...

Absolutely!! 😋

1 of the 3 pink enclosures I ordered arrived in the mail today :) This one has no graphic printed on it but the other two will have the graphic on them. Played around with the knobs I got while I'm waiting for the other parts lol 🤘🏻

Those are all awesome!! I love the timmah and the pacifier nice work 🤘🏻

Hehe no i got kinda scared to try it thinking i would brake it but ill evetually try it out once I get more experience under my belt. thanks for the info its always appreciated!! 🙂