Search results

Uhm, I just noticed that the minimum quantity for 0805 resistors is 50 at Tayda... what am I gonna do with the hundreds of resistors I will be left with?!? Necklaces? How is everybody else handling this?

Not to derail the technical discussion, but I always felt like the speaker moving so much air was a big part of the tube sound. Also the feel under my fingers is always different than anything else but I can’t tell you what that means! Good luck with the research, one day we may not have tubes...

Thank you! Now the hardest thing: choosing the color… 🧐

I am about to order pre-drilled Tayda enclosures for these. I was wondering if you thought the Lumberg power plugs were necessary or if the regular size ones would do? Also, I noticed that the 5mm LEDs do not fit through the faceplate holes, was it tricky to mount them so that they get through...

Nice, thank you!

Do we have a Tayda drill template for the tone generator? I thought this required a specially milled enclosure? I can’t find relevant threads so asking here. Thank you all!

I have been storing my PCBs in trading cards sheets for a while. I also bought some sheets with four pockets (no idea what they are supposed to be for) that work for larger boards. And for huge boards single pocket. I bought from Ultra PRO and their stuff seems pretty good.

Tuner, overdrive, octave down, envelope filter, phaser, dimension C, analog delays (I would say 5 but you can get away with 4), hall reverb, amp tremolo. Edit: you may want a phaser before and one after the drive. Or a vibe first and phaser after. And for the drive, try a Klon, TS...

Successful audio probing requires some understanding of circuits. Not all components should have signal and it is appropriate if sometimes the signal you hear at some nodes is very weak. To start, focus on active components: transistors and opamps. You can make troubleshooting threads for each...

Don’t forget about debt collection!

Isn’t that network necessary for the compressor to work properly? I’m not familiar with compression circuits.

I agree with this. I think choice paralysis is a problem and people try to stay away from too many choices (sometimes subconsciously). I tend to avoid restaurants where the menu is more than two pages!

Ah I see what you mean. I think your explanation makes sense. I kinda wanna run a spice sim of this…

I don’t see a voltage divider with the 100k resistor unless I’m missing something obvious? If the 100k resistor was before the other network then you would have a divider, but as is you get a tiny voltage drop across the 100k resistor but not much more? The RC plus diodes networks do ground...

Did you test each buffer individually to make sure they all work?

Now these are getting even more interesting… am I a gear snob?

That’s great! Are you gonna make a build report? Also you can mark this thread as solved. Good luck with your next projects, we are always here to help!

Can you share pics?

I believe from the mystery lugs to the mystery lug of the next one (out1, in2).

So one of the other leads should be connected to the tip when no jack is plugged in and open when the jack is connected. That’s the lead you need to connect to the next one.