Search results

Do you plan to trace it yourself to check if the schematic on FSB is correct? From youtube videos, the O2 might be my favorite

Do you guys know what the J177 is doing between gate and drain of the second jfet? That's one of the things I can't seem to simulate with LTspice

Disclaimer: it's entirely possible I'm wrong. With that out of the way, I don't think it should matter as much as you're reporting. Jfet gates need a path to ground, but that's one of the functions of legs 2 and 1 of the gain potentiometer (the other is providing a voltage divider to set the...

That is a voltage buffer (look for emitter follower or common collector) and it should work, yes

I've never been able to find the schematic for the O2. If it's been traced, I don't think it's been shared. Not sure how willing AMT would be to provide service manuals with factory schematics, but I've seen some online before

Cool, thanks! I'll try to find some good deals on germanium transistors and stock on some low-hfe Si

@Chuck D. Bones, this may be a little off-topic, so feel free to delete this post: have you tried piggybacking transistors (like Q2 and Q3 in here, for example) in place of the germanium transistors in your hybrid germanium-fet designs? I'm having trouble sourcing germanium transistors and those...

I love the blue caps to match the resistors! Where did you source them?

I have built a clone of the Hooke as well, that I really enjoy! One of the things I like about it is it runs on 9V, so no need for charge pumps (I try to avoid them as much as I can). Mine was built on a single sided pcb, with no switching circuit on board

It was never my intention to have this thread become what it became when I originally posted it, so I really appreciate you revisiting it with a technical discussion, and what I think is a super reasonable insight

Nice job! I Love everything about this

I've used a 2sk246-Y for Q1. If I recall correctly, it had Vp of around 1.5V and Idss ~ 3mA. As Chuck has pointed, I've played with R4, R2 and C3 in LTSpice to get similar biasing and gain. There's a small gain difference, but it was close enough for me to avoid ordering new parts. Pedal sounds...

If you're an artistic person or if you don't mind the rougher look, you can do some nice linocut prints, too.

I checked one of mine, the difference is subtle but it's a little different from yours (letters and numbers cover a larger area). And I can't see that residue

Mine look exactly like the left one, and they have all been in-spec for a 2n3819, which is not a super hard task, considering the parameter spread

Could you identify the fake 2n3819? Are they jfets, at least?

Robert's layouts are as good as they get, but it's a lot of fun seeing how different people (all very capable) approach board designing

Brett's build report was so good that I had to build (build report here) this one. It doesn't look as nearly as profesional as Brett's and Cooder's but I'm happy with how it turned out and it sounds amazing. I had no low gain Si transistors, so I'll include some in my next parts order and swap...

I just finished Chuck's version (thread here) of the Animals Diamond Peak Overdrive and it sounds absolutely killer. Not a single bad sound in it! Absolutely impressive and a must build for everyone, in my opinion. It transitions beautifully from clean to dirty, and all controls are very usable...

In the end, which jfets did you choose? That's gotta be my favorite sounding BSIAB II variant ever! It looks amazing, too