Search results

I just checked the layout and it seems set up for 2n5088. Are you sure the pinouts are different? They seem the same according to my google search. Try the transistors as normal without swapping b and c.

Thanks. This is really helpful. I’ll try this out

Hey everyone. I bought some of these led bezels lined below to try out but I’m having trouble getting them to work right. https://www.taydaelectronics.com/5mm-bezel-led-panel-mounting-clip.html Either they are too loose and the LEDs wiggle around or they are just too tight and I damage the...

Pics?

And another video with an envelope filter in front. I really like this sound.

Here is a video of my semi successful attempt. I managed to get it going by breaking the connection between the gain knob and c13 and adding a mosfet boost here. I think for next time I will make the following changes: Use the spare op amp for extra gain stage between gain and c13 Use a 1m...

Yes I’m realising that now. I didn’t realise the Timmy was low gain. I tried to do some calculations but I was obviously off. Do you mean I should increase the amount of boost in the first stage or f the Timmy? I’m not sure how boosting the second would affect the wave folder? Sorry if a silly...

Hello everyone. Some mixed success on this project. I put it together on the weekend and the Timmy section works. However the wave folder only works if I I have large amounts of signal going into it. I have placed a Mutron 3 in front of my prunes and Timmy and this activates the wave folder...

Typo sorry. Fixed it

The three things you have highlighted are all the same op amp. The + and - represent pins (Edit 8 and 4). Not sure about Kikad but in easy eda I select a footprint that has these three parts under the same heading. To make just one footprints out of 3 parts they must be named the same thing...

Thanks that looks good. I’ll save that.

More often than not the solution is checking you have used all the right parts. I use this link a lot https://www.digikey.com.au/en/resources/conversion-calculators/conversion-calculator-resistor-color-code

Hey. Your voltages look off, especially the 4558. Check your resistors around here especially r10 and r11. In fact it looks like you have a 100k resistor in r11 (brown, black, black, ORANGE, brown) instead of a 10k (brown, black, black, RED, brown). You should be getting 4.5v on pins 3 and 6.

This is amazing. I love the look so much and the internal dip switches. What does the modes switch do? You said it adds more gain? How is that?

I love the fuzz/op amp big muff idea! I think I will stop tinkering with the idea and just bite the bullet. As long as it works I will be happy even if the Timmy isn’t interesting. If successful I might look into a more appropriate overdrive or a fuzz like you suggested. Probably the fuzz!

Thanks. Do you have an example of the Salem key in action? Or know how i might implement it here? I’m a bit of an amateur with theory. Open to other overdrive ideas if you have any? Timmy was chosen mostly because it’s simple.

Actually looks like quite a few successful builds I the group

Looks like at least one person on the facebook group got it going. No mention of issues https://www.facebook.com/groups/1066092703545364/permalink/1225477497606883/?mibextid=W9rl1R

Would that look like this? From a different circuit but I think this is what you mean

Thanks. I'll do this. Why is this good practice? Not being rude, I just have no idea.