Search results

I redrawn the CE-1 preamp from the original CE-1 chorus (voltage part is simplified, just to work around on my software). I try it on breadboard, starting from same basic, I don't know if there's something wrong, because it doesn't work, though the schematic is that. First of all I excluded for...

Did you place your pedal before or after the drive pedal? Being a chorus the CE-1 should be after eventually fuzz, drive, etc. Anyway, I'm working on it.

As I said early to see the schematic would be great, but I think that should be just the same schematic we can see in the CE-1 Chorus Ensemble, with one exception. Looking the PCB here https://www.pedalpcb.com/product/pcb481/ in the MichaelW's PCB C2 is missing, but it seems to me that the...

Too see the schematic would be very appreciated! Meanwhile, I have some concern about the hiss problem with this circuit. At least two users here had this problem, if I don't wrong. Someone built even this stripboard version, too, with the same noise...

We don't have the schematic of this PCB, and I'm trying to understand, looking the PCB draw and this picture, if the resistors value are the same of the original schematic in the CE-1 or there are some adjustment and modify. But it's hard to say. Could someone reveal it, please?

Maybe a classic ROG Tonemender could be ok for your project. https://www.runoffgroove.com/tonemender.html Fendery, but even something more.

After I read your post I checked my TPA3118 PCB I bought from ebay. It's still close in the bag because I didn't try it. It has 28 pin, so it's a fake! What's the difference? It will work good as the genuine one? Max voltage, watt, noise, distortion... In an electronic forum I found this: Guy...

The Alpha pots I bought from Musikding feel like that. I still never bought Alpha pot without dust cover from Tayda, but I suppose now Tayda sells exactly the same pots of Musikding.

I prefer the safe way. But I see several TPA3118 building with no big wattage resistor. This big resistor is just to use this amp with oscilloscope or I need it if I use the amp with a speaker to play the guitar? I found these: - 6.8 Ohm http://www.banzaimusic.com/6-8-ohm-100w-wirewound.html...

I forgot, but the speaker is 8 Ohm. Thanks, but I'm lost, a bit. Anyway, I didn't have any 100W 8R resistor, I don't have the oscilloscope. I thought to test the power amp with the guitar directly into it, and the speaker at the output. I checked again the datasheet, maybe I asked it before...

Meanwhile, I received my first TPA3118. I guess I have to wait the end of the summer to test it: power up with a 1-spot 1700mA PSU and then another cheap PSU for pedal, a RockPower 18v 2000mA. I'll use a 15w 8" speaker. Are there any risk of damage something with those stuff?

It looks very fine! I'm looking this project right now and I have some doubts about the diodes. Common 1N4148 and 1N914 will sounds ok. But it's almost impossible to found the original ones. But even some good alternative diodes. What diodes in your built? Some advice about them? Thanks!

I use the breadboard sometime when I want to try some pedal but I'm not sure if I really want to build it. If I don't like it too much I try to change some parts. For example, now I have on my breaboard the LoFo Mofo. I didn't like it how I thought. Later my friend want to hear it, and then I...

I wondered it, sometime. But I never built it in eight years since I build pedals. I never had the original, but I'm curious to try it. I built some pedals I say sound and work better, but some mod in the DS-1 are fine and cool. It's easy enough to build it, but it's not a problem build some...

Hello. I never really be so interested in this pedal, but periodically I fall on it, and every time I see that the schematic we can find is never been verified. Probably it's close but not so accurate. Some values are guessed or unknown. Someone who built it had oscillation problem with higher...

The LED, indeed, are not a problem, nor so urgent. But if I need I should order them somewhere else at the first occasion. The only problem it will cost more than Tayda, a bit less then once, but those are less convenient than Tayda. While the nuts, I afraid, are too much small to find in a...

I forgot to mention it: I from Italy. For EU Country there are new rules about duties. DHL has their custom fee, but even post have their rules. With the post, in Italy, under 150 € we have to pay just the VAT, indeed I anticipated the fee I had to pay, but that not how much I was expecting...

I placed my order on Tayda. About 76 $ of materials, about 22 $ of Thailand post delivery. (Weight 824g). I expected about 22% of VAT on 98 $, around 22 $ but the fee I paid to the delivery guy was almost double. OK. Now, Tayda, to repair a mistake, can send me 4 red LED 3mm and 8 small nuts, I...

For baritone and downtuning guitar less bass helps to get on focus low notes. My built of the Revv G4 has enough low end, but not so much (the Triple Wreck has a lot of bass). I'm not an expert, but I's say that Revv seems to be the new generation amp with tight bass. This is my opinion, right...

I have this circuit on veroboard, and I don't hear any lack of treble. Did your pedal go directly in the power amp? In the return? I have a Crate solid state amp, and I use my distortion pedal in the input of the amp because, for some reason, any drive/distortion pedal I have doesn't sound right...