Search results

  1. C

    Skeptical Buffer Mockup Pedal - Arriving Soon!

    Can we get the BOM? Would like to add these parts to my next order.
  2. C

    6 Band EQ formula?

    I have been trying to re-create the ADA MP1 sound. I made a tube version, with the buffer and OP amp distortion going into the tube section. It works, but I was not able to get the EQ section working great. I decided to try to make a simpler version of the ADA MP1 EQ section. I got it to work...
  3. C

    6 Band EQ formula?

    Got it working, stupid me. Pin 1 from the pots was not soldered. Now, I was thinking of adding this EQ to the end of the new Victory preamp circuit for their V1 pedals. I thin their new design sounds very good. The Kraken, Sheriff, and Jack circuits are very similar. I attached a copy of the...
  4. C

    6 Band EQ formula?

    Yes
  5. C

    6 Band EQ formula?

    Okay, I built the 6 band EQ, but only used 4 of the bands. I made it with the 4 frequencies as the MP1 just changing (4) caps per the calculator. And it works, but the volume drops a lot. I am guessing i could increase resistors R3, and or R7 to increase the volume. Does that sound correct to...
  6. C

    Missing Build Docs / Schematics

    Got it fixed, another bad pot. Works now, thanks!!! Anyway to see the schematic for the Doxie?
  7. C

    Missing Build Docs / Schematics

    Thank you!!!
  8. C

    Missing Build Docs / Schematics

    Having issues with my Bobby build, is there a schematic, and PCB layout? Need it to figure out my build
  9. C

    6 Band EQ formula?

    Yes, i do have a 7 band eq, Danelectro Fish and chips. Using the calculator link, i came up with the cap values to get 160hz, and 600hz. I do not know much about the Q filter, but changing these same values from C1 to C2 really changes the Q. See attached:
  10. C

    6 Band EQ formula?

    Is it possible to use the Pedal PCB board, and just change some components values to get to the same frequencies? I do not want to convert the pedal PCB to match the MP1 schematic, just throwing that out there based on your comment about jumpers and cuts....
  11. C

    6 Band EQ formula?

    I want to be as accurate as possible With all the preamps I have made, to my ears the distortion is basically the same, just different levels of gain. And what seems to be the difference between the amps is the tone stacks. I love 80’s Rome (Extreme, white Lion), so I wanted to try to create...
  12. C

    6 Band EQ formula?

    I would like to re-create the ADA MP1 eq section using this pedal PCB, and only using (4) of the (6) pots. The frequencies, i believe are: Treble - 1.6k Mids - 600 Bass - 160 Presence - 3k Would it be fairly easy to switch some values to get these frequencies? I tried plugging in different...
  13. C

    PPCB Cobbler (victory copper)

    Anyway to share the schematic
  14. C

    Tear Jerker wah-10k pot

    Thanks!
  15. C

    Tear Jerker wah-10k pot

    I have an expression pedal I am going to use with my tear jerker wah build, because I am putting all the controls accessible in its own pedal. But the pot is a 10k pot, and the build asks for a 100k pot. Is there anyway to adjust the tear jerker board to use a 10k pot?
  16. C

    Where to begin?

    Looking for chords not individual strings to drop tuning by half steps.
  17. C

    Where to begin?

    Actually, looking more for drop tuning. Like what the Drop does, more then pitch shifting
  18. C

    Where to begin?

    Do you know where I can get the program, or program name
  19. C

    Where to begin?

    Will the FV do polyphonic pitch shift? Similar to Pitchfork
  20. C

    Ocelot build. Serious ass kicking.

    Fixed, bad pot and putting 100k in R5 that is suppose to be 10k really boosts the gain. Side note, that does make a nice boost in front of distorted amp. It sounded really good
Back
Top