Search results

Oh sweet I’ll go check that out

Anyone ever build something like this? I want to build a dual cab sim and active DI box to run stereo effects into active monitors or to an interface.

I think I may have figured this out and if I’m right I’ll gladly sport the dunce cap. I’ll update later

I was thinking this is what I would likely have to do. Thank you. Do you think I could disconnect each pedals power connections and power it from a different isolated supply to see if having the pedal circuits power on a separate ground isolates the noise?

Hey folks so two things right up front. 1. How the F have I never built and used an audio probe before this?!?! 2. I’m never boxing then rocking ever again That said I’m thinking this is not as bad as I initially thought. I’ve posted a video where I walk through what the main problem is but...

Ok folks I boxed her up and for the most part all circuits pass signal and my relay switching functions as it should. I do hear some issues with two circuits mainly the Rat and the Transcendence boost. I fashioned an audio probe and currently am taking some videos to share with you all...

Gauging interest and/or feasibility of making relay bypass boards that can house multiple switches I.e. one board that has spots for 4 relays, four switches, four sets of I/O etc. Something like this would have been killer with my multi build. Especially with the ability to run the multi relay...

I think this is the final update before I finish and post the build report. I had to build a platform for the back row pedals so they could be reacheable and to allow room for cabling to the big box. Everything fits nicely in the road case. Just have to finish wiring up all the power...

If this is like the Electrovibe in terms of alignment you can use pin headers 2.54mm spaced and use the bypass boards. I would verify that though

I wouldn’t change the pot I think it’s really too much. I know there’s a way to do it with just a resistor change but I’m not sure exactly what that would be. Good luck!

Hey there make sure if you are doing the fuzzdog mods you match the resistor numbers from the fuzzdog pdf to the particular resistors in the PedalPCB schematic. The numbers are not the same. Honestly after having this pedal for a while I don’t care the dwell pot and oscillation mod. The unity...

Thank you!

I’m nearing the end on this thing and I plan to answer that info in the build report. Short answer is a lot of money and too much time 🤣

Dude love the artwork! That’s a great movie

Go big or go home

Thanks! Once I get this finished up I’ll post a detailed build report

Getting close guys! All the boards are soldered up just have to start wiring everything together.

Dudeeeee this is awesome

Check these things out. @amplifyfun killing it with the faceplates!!

That’s why I farm that out!